25Products found
View
Filter
  • Grooved Check Valve

    Brand: TYCO-CENTRAL

    The TYCO Model CV-1F Grooved End Swing Check Valves are compact  and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction.

     

    View Product Datasheet

    QR 525.00QR 1,245.00
    View Options
  • Wet Alarm Valves

    Brand: TYCO-CENTRAL

    The TYCO Model Alarm Check Valves are intended for use in wet pipe (automatic sprinkler) fire protection systems.

     

    View Product Datasheet

    View Options
  • Refrigerant Pipe Insulation

    Brand: Worldflex

    Worldflex is a high-quality Class-1 Elastomeric/Rubber Insulation which is a flexible, closed-cell tube insulation product used to conserve energy and prevent condensation on piping applications.  The product’s closed-cell structure creates exceptional thermal properties that protect against moisture penetration in refrigeration tubing applications.  

    Low flame spread: When fire tested, World Flex  does not generate flaming droplets and  has low flame spread achieving the fire performance of Class 1

    Fire:  Class 1 BS 476 Pt 7 1997

    Ozone Depletion: Zero

    HCFC-CFC free

    Standard length : 6 FEET LONG CLASS “1” PIPE SECTIONS

    Purchased as Box Qty 

    View Product Datasheet

    QR 122.00
    View Options
  • Pressure Tank

    Brand: WATES

    Wates Pressure tanks used for drinking water level risers and distribution systems are required to maintain pressure in the system, optimize pump operation, guarantee a water reserve and protect against water impacts.

     

    View Product Datasheet

    QR 2,360.00QR 3,800.00
    View Options
  • Discharge Nozzle Brass

    Brand: Marcon Safety

    FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option

     

    View Product Datasheet

    QR 345.00
    View Options
  • Pipe Insulation – FSK Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Faced with FSK – Pipe sectionswith a factory-applied reinforced Aluminum foil covering (FSK) incorporating an overlap. Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting.

    Standard length: 1.2 MTR

    View Product Datasheet

    View Options
  • Pipe Insulation – Aluglass Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting. Aluglass facing ensures zero water vapor permeability, puncture resistance, and eliminates the need for external weather protection

     

    View Product Datasheet

    View Options
  • Butterfly Valve Grooved End

    Brand: TYCO-CENTRAL

    The TYCO Models BFV-300 and BFV300C Grooved End Butterfly Valves are indicating type valves designed for  use in fire protection systems where  a visual indication of open or closed  valve condition is required

    • Designed for use in fire protection systems
    • UL and ULC Listed
    • FM Approved

    View Product Datasheet

    View Options
  • Rubber Lined Split Clamps

    Brand: WEICCO

    A Convenient and effective means of preventing crushing of pipe supports of Chilled Water, Condenser water and Domestic hot/cold water installations. Available for any pipe size and insulation thickness,

     

    View Product Datasheet

    QR 1.00QR 4.55
    View Options
  • cylinder mounting bracket

    Cylinder Mounting Bracket

    Brand: PYROCHEM

    Vertical bracketing of the PCL-160, PCL-300 and PCL-460 is provided by the Model MB-15 bracket kit . Vertical bracketing of the PCL-600 is provided by the Model MB-1 bracket kit . These kits must be ordered separately with each cylinder/valve assembly. Cylinder installation instructions are provided in the installation section of this manual.

    • Cylinder Bracket
    • These kits must be ordered separately with each cylinder/valve assembly
    • Cylinder installation instructions are provided in the installation section of this manual.

    View Product Datasheet

    QR 262.00QR 275.00
    View Options
  • Pyrochem Nozzle

    Nozzle

    Brand: PYROCHEM

    Nozzles have been developed for appliance, plenum, and duct applications. All nozzles have a specific flow point value and are supplied with metal blow-off caps to prevent clogging. Each nozzle is stamped with the model number.

    View Product Datasheet

    QR 145.00QR 154.00
    View Options
  • Agent Cylinder With Valve

    Agent Cylinder With Valve

    Brand: PYROCHEM

    The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure

    • Meets the requirements of the Building Officials and Code Administrators (BOCA)
    • Meets the requirements of the International Building Code (IBC)
    • Approved by the City of New York Material and Equipment

     

    View Product Datasheet

    QR 2,445.00
    View Options
  • Simplex maintenance switch

    Abort Switch

    Brand: Simplex

    Single-gang size; includes 3 position contact block housing with 1 contact block UL, ULC, CSFM listed.

     

    View Product Datasheet

    QR 381.00
    View Options
  • Simplex 4010

    Basic Control Unit Modules

    Brand: Simplex

    4010 control panel Basic Control Unit with 2 x 40 LCD Operator Interface and (1) Two-loop Isolated IDNet+ Communications Channel, Class A or Class B operation, with support for up to 248 addressable IDNet points

     

    View Product Datasheet

    QR 4,500.00QR 5,262.00
    View Options
  • Switch Input Module

    Brand: Simplex

    These remote annunciator graphic control modules complement Simplex 4007ES, 4010ES, 4100ES, and 4100U (and other installed legacy panels) by providing LED/lamp/relay drivers and switch inputs to allow custom graphic displays to be designed for specific facility requirements, such as for smoke control (UUKL) systems.

     

    View Product Datasheet

    View Options
  • Multi-Candela Strobes

    Brand: Simplex

    Multi-candela strobe with intensity selectable as: 15, 30, 75, or 110 candela; synchronized flash rate.

    • Simplex fire alarm control panels with NACs selected to provide strobe synchronization or SmartSync two-wire control
    • Ceiling mount strobes installed using standard single gang electrical boxes.
    • Rear of housing does not extend into box

     

    View Product Datasheet       

    View Options
  • Container Label

    Brand: Marcon Safety

     

    The container label detailsthe weight of NOVEC™ 1230 contained, empty weight, fill density and charge date.

     

    View Product Datasheet

    QR 286.00
    View Options
  • Hose Male Adaptor

    Brand: Marcon Safety

    The male pilot hose connector is used to connect two pilot hoses together for systems where a second container of  a different size is used to protect a different enclosure. 

     

    View Product Datasheet

    QR 43.00
    View Options
  • Manual/Pneumatic Actuator

    Brand: Marcon Safety

    This Actuator is Used for  mechanical or pneumatic operating system at the container position and is fitted to the top of the valve assembly or removable electrical actuator.

     

    View product Datasheet

    QR 334.00
    View Options
  • Manifold Inlet

    Brand: Marcon Safety

    Manifold inlets are available for the construction of system manifolds. Threaded Inlet for Manifolds

     

    View Product Datasheet

    QR 382.00
    View Options
  • Trim Vertical Closed Drain Co...

    Brand: TYCO-CENTRAL

    The TYCO Series  “Royal Flush II” Concealed Pendent  Sprinklers Quick Response (3-mm bulb) and Standard Response (5-mm  bulb), are decorative sprinklers featuring a flat cover plate designed to conceal the sprinkler.

    The TYCO Model RC-1 Retard Chamber is required in installations that will be subject to pressure variations, as are generally associated  with public water supplies, in order to help prevent false alarms.

    • Quick & Standard Response, Standard Coverage
    • Designed to conceal the sprinkler.
    • UL Listed and FM Approval

     

    View Product Datasheet         RFII

    QR 1,260.00
    View Options
  • Valve Single Tank Adaptors

    Brand: Marcon Safety

     

    When a single 343 litre container is being used without a manifold, three swivel adaptors are available for  connection to the discharge outlet

     

    View Product Datasheet

    QR 657.00
    View Options
  • Deluge Valve, Diaphragm Style

    Brand: TYCO-CENTRAL

    The DV-5 Deluge Valve is a diaphragm style valve that depends upon water pressure in the Diaphragm Chamber to hold the Diaphragm closed against the water supply pressure. These valves are to be used only for hydraulically calculated systems.

     

    View Product Datasheet

    QR 3,882.00
    View Options
  • Fire Alarm

    Flashing Strobe

    Brand: Simplex

    TrueAlert ES addressable strobes are individually addressed visible notification appliances that receive power, supervision, and control signals from the Simplex fire alarm control panel providing IDNAC  Signaling Line Circuits (SLCs).

     

    View Product Datasheet

    View Options

Main Menu

💬 Need help?