-
Single Deflection Grilles (Mo...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
JMC Grilles and Registers have adjustable louvers and are available in single deflection models. The Single deflection grilles are designed to have one set of blades in the horizontal or vertical orientation. Air pattern is adjustable in one plane only. The Horizontal type provides the control over the deflection of the air pattern on adjustments whereas the vertical type provides the spread control of the air pattern reducing both throw and drop.
View Product Datasheet
QR 12.00 – QR 94.00View Options -
Egg Crate Grilles (Model: KECG)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
JMC Return / Exhaust Grilles utilize core of cubical grid and mostly used where maximum free area is desired and “see through” is not a concern. These Grilles are typically used in ceiling applications where “see through” sight lines are minimized to directly below the grille. Recommended for general return or exhaust of room air.
View Product Datasheet
QR 28.00 – QR 233.00View Options -
Door Grille (Model: XNSA)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC air transfer Grilles or Door grilles are typically used indoors and partitions to allow airflow to a space that is not directly served by a ducted source of supply air or a ducted outlet for return or exhaust air. These Door / Wall Grilles offer the largest free area possible with a complete sight proof or lightproof core.
View Product Datasheet
QR 32.00 – QR 210.00View Options -
Jet Diffuser (Model: KDJ)
Finish: Powder coated to RAL 9010 as standard. Other finish available as option.
JMC Jet diffuser is a high capacity diffuser with jet-type airflow specifically designed for spot heating or cooling in high ceiling applications. The elegant design is best suited for an architectural high-end appearance and provides a modern alternative to any traditional diffusers while upholding the trusted performance characteristics.
View Product Datasheet
QR 234.00 – QR 1,496.00View Options -
Linear Slot Diffuser (Model:...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
Linear Slot Diffusers manufactured by KMC have been designed to satisfy architectural concepts that require continuous length applications without compromising air distribution performance. These diffusers utilizes an adjustable vane in each slot to control the direction of air discharge either parallel with or perpendicular to its face surface. The adjustment from the face of the diffuser allows for pattern control in a full 180 degree range for either right or left parallel, intermediate or perpendicular
View Product Datasheet
QR 46.00 – QR 1,001.00View Options -
Double Deflection Grilles (M...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC supply Grilles and Registers have adjustable louvers and are available in double deflection models. The Double deflection grilles are designed to have two sets of blades in both the horizontal or vertical orientation with air pattern being adjustable in both horizontal and vertical planes. Adjustment of the Horizontal blades provides the control over the deflection of the air pattern. Adjustment of the vertical blades provides the spread control of the air pattern, reducing both throw and drop.
View Product Datasheet
QR 18.00 – QR 611.00View Options -
Exhaust Grilles (Model: KX3HD)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC Return / Exhaust Grilles utilize core of parallel fixed blades set at a deflection, generally 45° from horizontal to provide minimum “see through”. These Grilles are mostly utilized for side wall application with blade deflection upward in high applications and down in lower applications.
View Product Datasheet
QR 18.00 – QR 39.00View Options -
Circular Diffuser (Model: KCM)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC Circular Diffusers have a circular cone with elegant styling to provide maximum air diffusion efficiency. They are intended for application in air conditioning and ventilation systems in civil as well as industrial zones. Suitable for cooling and ventilation systems for wide diffusion effect.
View Product Datasheet
QR 50.00 – QR 295.00View Options -
Disc Valves (Model: KDV)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC Supply and Exhaust disc valves are utilized where the control of supply or Exhaust air volume flow rate is the primary consideration. These valves offer considerable cost advantage over conventional grilles and diffusers without compromising performance or aesthetics. Ease of adjustments, maintenance and cleaning are also prominent features of these valves.
View Product Datasheet
QR 40.00 – QR 102.00View Options -
Square Diffusers ( KDF series)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
The performance objective of a ceiling air Diffuser is to deliver conditioned air into an occupied space in a quiet draft free manner. The performance efficiency of a particular diffuser design is usually judged by the diffuser’s ability to rapidly dissipate the air velocities and temperature differential of the supply air before it enters the occupied space. Many Models are developed by KMC to meet air distribution and architectural requirements.
View Product Datasheet
QR 38.00 – QR 145.00View Options
- ALL PRODUCTS
- FIRE FIGHTING & FIRE ALARM
- HVAC & PLUMBING
- INSULATION MATERIALS
- AIR OUTLETS & DAMPERS
-
Grilles & Diffusers
- Egg Crate Grilles (Model: KECG)
- Door Grille (Model: XNSA)
- Spot Diffuser (Model: SPD)
- Jet Diffuser (Model: KDJ)
- Linear Slot Diffuser (Model:…
- Double Deflection Grilles (M…
- Exhaust Grilles (Model: KX3HD)
- Circular Diffuser (Model: KCM)
- Disc Valves (Model: KDV)
- Square Diffusers ( KDF series)
- Single Deflection Grilles (Mo…
-
- BROWSE BY BRANDS
-
- NEW ARRIVALS
NEW
-
Refrigeration Copper Coils
Brand: IUSA Cambridge Lee
Copper Pipes & Coils manufactured to ASTM B743 standards are suitable for gas applications and other high-pressure refrigerants.
Buy nowIsoline Pipe InsulationBrand: K-Flex Isoline
Isoline is a high-quality rubber insulation which is a closed-cell tube insulation product used to prevent condensation on piping applications.
Buy nowWall Split Air ConditionerBrand: Ruud
Developed with environment friendly R410A refrigerant. R410A refrigerant is highly efficient and has an Ozone Depletion Potential (ODP) of 0.
Buy now
-