21Products found
View
Filter
  • Standard Air Louvers Model FAL

    KMC Air Louvers are designed for both intake and exhaust air service for commercial & Industrial applications. 

    The fresh air louver is used to supply fresh air to the buildings or Air Handling Units (AHU). 

    Louvers are designed and manufactured for use in external applications. 

    Blades are fixed and at 45deg to protect against ingress of rain water. 

     

    View Product Datasheet

    QR 48.00QR 309.00
    View Options
  • Pressure Independent VAV unit...

    KSQ terminals are AHRI Certified and are tested in accordance with AHRI Standard 880.  

    Optional factory installed electric heaters and integral sound attenuators for ultra-quiet performance are also  available . 

    Note: The unit is supplied as a VAV box only . Controller and actuator to be provided by contractor .

     

     

     

    View Product Datasheet

    QR 238.00QR 498.00
    View Options
  • Curtain Fire Damper (UL 555 &...

    The fire damper is intended to restrict the passage of flame; it shall consist of UL listed fusible link rated to 165˚F which shall release the curtain blades in the event of fire. The standard installation requires that the damper is positioned so that the closed plane of the blades is within the fire rated masonry/concrete barrier. 

    For non-standard construction & for more details consult our sales team. 

    View Product Datasheet     17S     17 D     38 S    38 D

    QR 148.25QR 1,033.00
    View Options
  • Combination Fire-Smoke Damper...

    Combination Fire Smoke dampers are designed to prevent the spread of fire and smoke through the ventilation ducts in the HVAC systems. 

     

    All the Combination Fire Smoke dampers are UL certified and QCDD approved. 

     

     View Product Datasheet     MA1     LA1     MS1     MT1

    QR 1,030.00QR 4,375.00
    View Options
  • By-Pass VAV unit (Model: KME)

    By-pass VAV terminals consist of a single primary air damper that shall proportion the total primary air through the terminal to either the ceiling plenum or the space as dictated by the space thermostat demand. These units are available with various casing materials & treatments with factory mounted actuators as required. 

    Note : The unit is supplied as VAV box only. Controller & actuator shall be provided by the contractor.

     

    View Product Datasheet

    QR 190.00QR 532.00
    View Options
  • Linear Bar Grilles

    KMC Linear Bar Grilles are designed to have combined benefits of architectural beauty with performance versatility. These Grilles are an excellent choice for applications where they are exposed and accessible to heavy traffic.

     

    View Product Datasheet

    QR 42.75QR 2,945.53
    View Options
  • Single Deflection Grilles (Mo...

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     JMC Grilles and Registers have adjustable louvers and are available in single deflection models. The Single deflection grilles are designed to have one set of blades in the horizontal or vertical orientation. Air pattern is adjustable in one plane only. The Horizontal type provides the control over the deflection of the air pattern on adjustments whereas the vertical type provides the spread control of the air pattern reducing both throw and drop. 

     

    View Product Datasheet

    QR 12.00QR 94.00
    View Options
  • Sand Louvers Model KSTL

    The Sand Trap Louvers Model KSTL are designed for usage in serving as a Pre – Filter element in  dusty conditions. It has a degree of separation of sand and large dust particles, even in cases  of high dust concentrations. The vertically arranged sections and holes for sand drainage ensure the sand trap louver is self- cleaning and maintenance free. The sand trap louver is designed to separate large particles at low air velocities, thus avoiding excessive dust loading on conventional plant filters. It is not intended as a substitute for conventional supply air filtration. 

     

    View Product Datasheet

    QR 30.00QR 2,786.30
    View Options
  • grilles

    Egg Crate Grilles (Model: KECG)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     JMC Return / Exhaust Grilles utilize core of cubical grid and mostly used where maximum free area is desired and “see through” is not a concern. These Grilles are typically used in ceiling applications where “see through” sight lines are minimized to directly below the grille. Recommended for general return or exhaust of room air. 

     

    View Product Datasheet

     

    QR 28.00QR 233.00
    View Options
  • Door Grille (Model: XNSA)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC air transfer Grilles or Door grilles are typically used indoors and partitions to allow airflow to a space that is not directly served by a ducted source of supply air or a ducted outlet for return or exhaust air. These Door / Wall Grilles offer the largest free area possible with a complete sight proof or lightproof core. 

     

    View Product Datasheet

    QR 32.00QR 210.00
    View Options
  • Spot Diffuser (Model: SPD)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC Spot diffusers are recommended for use in large spaces such as malls, exhibit hall, etc., Where directional control of conditioned air is of very much importance. The adjustable nozzle models make it possible to adapt the jet discharge angle to suit different operating conditions. 

     

    View Product Datasheet

    QR 192.00QR 590.00
    View Options
  • Jet Diffuser (Model: KDJ)

    Finish: Powder coated to RAL 9010 as standard. Other finish available as option. 

     

    JMC Jet diffuser is a high capacity diffuser with jet-type airflow specifically designed for spot heating or cooling in high ceiling applications. The elegant design is best suited for an architectural high-end appearance and provides a modern alternative to any traditional diffusers while upholding the trusted performance characteristics. 

     

    View Product Datasheet

    QR 234.00QR 1,496.00
    View Options
  • Duct Access Door (Model: AD*)

    Duct access doors are manufactured in accordance to SMACNA standard using high quality materials to provide access for life safety damper inspection, controls adjusting, and many other applications in HVAC ducts. 

     

    View Product Datasheet

     

    QR 31.03QR 102.85
    View Options
  • KSLAD, KRLAD

    Linear Slot Diffuser (Model:...

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    Linear Slot Diffusers manufactured by KMC have been designed to satisfy architectural concepts that require continuous length applications without compromising air distribution performance. These diffusers utilizes an adjustable vane in each slot to control the direction of air discharge either parallel with or perpendicular to its face surface. The adjustment from the face of the diffuser allows for pattern control in a full 180 degree range for either right or left parallel, intermediate or perpendicular 

     

    View Product Datasheet

    QR 46.00QR 253.05
    View Options
  • Double Deflection Grilles (M...

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC supply Grilles and Registers have adjustable louvers and are available in double deflection models. The Double deflection grilles are designed to have two sets of blades in both the horizontal or vertical orientation with air pattern being adjustable in both horizontal and vertical planes. Adjustment of the Horizontal blades provides the control over the deflection of the air pattern. Adjustment of the vertical blades provides the spread control of the air pattern, reducing both throw and drop.  

     

    View Product Datasheet

    QR 18.00QR 611.00
    View Options
  • Exhaust Grilles (Model: KX3HD)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

     KMC Return / Exhaust Grilles utilize core of parallel fixed blades set at a deflection, generally 45° from horizontal to provide minimum “see through”. These Grilles are mostly utilized for side wall application with blade deflection upward in high applications and down in lower applications. 

     

    View Product Datasheet

    QR 18.00QR 39.00
    View Options
  • Volume Control Dampers

    Volume control Dampers may be installed vertically or horizontally . Suitable for Drive and Slip duct connections

    Can be installed in Vertical and Horizontal duct branches.  

     

    View Product Datasheet     Flanged      Flat Frame

    QR 41.00QR 554.00
    View Options
  • KCM Round diffuser

    Circular Diffuser (Model: KCM)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC Circular Diffusers have a circular cone with elegant styling to provide maximum air diffusion efficiency. They are intended for application in air conditioning and ventilation systems in civil as well as industrial zones. Suitable for cooling and ventilation systems for wide diffusion effect. 

     

    View Product Datasheet

    QR 50.00QR 295.00
    View Options
  • Round Volume Control Damper (...

    Round volume control dampers are widely used in the HVAC industry to adjust/control the airflow rate through round/flexible ducts efficiently. JMC dampers shall have hand quadrants with wing lock nut arrangement & open/close markings to record the blade position. 

     

    View Product Datasheet

    QR 41.00QR 284.00
    View Options
  • KDV

    Disc Valves (Model: KDV)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC Supply and Exhaust disc valves are utilized where the control of supply or Exhaust air volume flow rate is the primary consideration. These valves offer considerable cost advantage over conventional grilles and diffusers without compromising performance or aesthetics. Ease of adjustments, maintenance and cleaning are also prominent features of these valves. 

     

    View Product Datasheet

    QR 40.00QR 121.50
    View Options
  • Square Diffusers ( KDF series)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    The performance objective of a ceiling air Diffuser is to deliver conditioned air into an occupied space in a quiet draft free manner. The performance efficiency of a particular diffuser design is usually judged by the diffuser’s ability to rapidly dissipate the air velocities and temperature differential of the supply air before it enters the occupied space. Many Models are developed by KMC to meet air distribution and architectural requirements. 

     

    View Product Datasheet

    QR 38.00QR 145.00
    View Options

Main Menu

💬 Need help?