21Products found
View
Filter
  • U Bolt

    Brand: WEICCO

    Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts. Also available with EPDM sleeves.

     

    View Product Datasheet

    QR 8.65QR 17.29
    View Options
  • Test Plug

    Brand: Flowcon IVC

    Material full body core : Brass , Core : Neoprene , Max.Pressure : 33 Kg /cm2 , Temperature Range : -20 to 105 deg C , Working Fluids : Hot & Cold water / Air

     

     

     

     

    View Product  Datasheet

     

    QR 24.00
    View Options
  • SS Flexible Connector

    Brand: Flowcon IVC

    FLOWCON IVC SS FLEXIBLE CONNECTOR  ONE END MALE OTHER END FEMALE UNION

    FIVC Flexible Hose is designed for the connection between water-supply networks, boilers, burners, and steam plants,  in which high pressure and high temperatures are required.

     

    View Product Datasheet

    QR 31.00QR 58.00
    View Options
  • Gasketed Brass Plug

    Brand: WATTS

    Series CO-260 epoxy coated cast iron floor cleanout with 8 in. (203mm) round adjustable gasketed heavy-duty ductile iron top, removable gas tight gasketed brass cleanout plug, and no hub (standard) outlet.

     

    View Product Datasheet

    QR 585.00
    View Options
  • U Strap With EPDM Lining

    Brand: ETALIA

    A Standard Pipe Strap with lining is recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.

    View Product Datasheet

    QR 1.59QR 10.29
    View Options
  • Clevis Hanger

    Brand: ETALIA

    A Clevis Hanger provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.

     

    View Product Datasheet

    QR 1.63QR 20.93
    View Options
  • Pipe Hanger with EPDM Lining

    Brand: ETALIA

    PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.

     

    View Product Datasheet 

    QR 0.65QR 3.28
    View Options
  • Band Hanger

    Brand: B-Line Cooper

    Material: Steel, Pre-Galvanized to G90 specifications
    Function: For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation.

     

    View Product Datasheet

    QR 1.00QR 16.65
    View Options
  • Extention Split Pipe Clamp

    Brand: B-Line Cooper

    Material: Malleable Iron
    Function: Designed for suspending non-insulated pipe horizontally or vertically.
    Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
    Standard Finish: Plain or Electro-Galvanized.

     

    View Product  Datasheet

    QR 3.85QR 26.50
    View Options
  • Rubber Lined Split Clamp

    Brand: B-Line Cooper

    Standard finish: Electro-zinc plated complies with ASTM B633
    Function: Designed for suppressing vibration and sound

     

    View Product  Datasheet

    QR 1.27QR 5.44
    View Options
  • U Bolt

    Brand: B-Line Cooper

    Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts

    View ProducDatasheet

    QR 9.60QR 256.00
    View Options
  • Riser Clamp

    Brand: B-Line Cooper

    A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe.

     

    View Product  Datasheet

    QR 14.30QR 131.00
    View Options
  • Short Insulation Protection S...

    Brand: B-Line Cooper

    Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
    Finish: Pre-Galvanized

     

    View ProducDatasheet

    QR 5.70QR 14.50
    View Options
  • Pressure Sensor for Liquids

    Brand: BELIMO

    Active sensor (4…20 mA) for pressure measurement in HVAC systems. The sensor is suitable for water and water/glycol mixtures

     

    View Product Datasheet

    QR 686.00
    View Options
  • O- Ring

    Brand: BIRAL

    O rings are used to block a path that may otherwise allow a liquid or a gas to escape. The o ring is placed into a groove to secure them in place, and then compressed between two surfaces

     

    View Product Datasheet

    QR 224.00
    View Options
  • Inlet Cone

    Brand: DYNAIR

    It allows a higher fan efficiency in case of installation with an inlet or outlet not ducted. Manufactured in steel sheet, with one flange according to UNI ISO6580 – EUROVENT to be fitted to the CC fan, and an aerodynamically shaped bell mouth, with fixing holes for a protection guard Protected against atmospheric agents by epoxy paint.

     

    View Product Datasheet

    QR 1,365.00
    View Options
  • High Flow Insert

    Brand: Flowcon IVC

    The High Flow PICV Insert enables flow rates up to 0.5 l/s in the DN15 and DN20 valves and flow rates up to 0.736 l/s in the DN25 valve, which is beneficial for installations with space limitations. Check out the data sheet on our product page for all details.

    View Product Datasheet

    QR 228.00QR 395.00
    View Options
  • Dielectric Flanged Pipe Fittings

    Brand: WATTS

    LF3100M3 dielectric unions feature an iron pipe thread by a copper solder joint. These fittings are designed to be installed between pipes made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray currents.

     

     

    View Product Datasheet

    QR 586.00QR 2,343.00
    View Options
  • Automatic air vent valve

    Automatic Air Vent

    Brand: WATTS

     

    Used in all traditional heating systems (independent, central, radiant panel, etc.) to vent air during the filling phase and the air released into the water during the heating phase

     

    View Product Datasheet

    QR 23.00QR 32.00
    View Options
  • Hose Connection Vacuum Breakers

    Brand: WATTS

    Series LF8 is a line of unique vacuum breakers specially made to permit the attachment of portable hoses to hose thread faucets.  Designed to prevent the flow of contaminated water back into  the potable water supply, these devices require no  plumbing changes and screw directly onto sill cocks

     

    View Product Datasheet

    QR 82.00
    View Options
  • Drain Cock

    Brand: WATTS

    Drain valve for boilers, with hose fitting, plug, and chain.

     

    View Product Datasheet

    QR 34.00
    View Options

Main Menu

Open chat
💬 Need help?