9Products found
View
Filter

  • Refrigerant Pipe Insulation

    Brand: K-Flex Isoline

    Isoline (from K-Flex) is a high-quality Class-1 Elastomeric/Rubber Insulation which is a flexible, closed-cell tube insulation product used to conserve energy and prevent condensation on piping applications.  The product’s closed-cell structure creates exceptional thermal properties that protect against moisture penetration in refrigeration tubing applications.  

    Very low thermal conductivity high water vapor diffusion resistance:  Closed-cell elastomeric insulation has a high water vapor diffusion resistance factor µ (µ>̲5000)  which minimizes water vapor penetration, giving an excellent long-term performance.

    Low flame spread: When fire tested, ISOLINE does not generate flaming droplets and  has low flame spread achieving the fire performance of Class 1

    Fire:  Class 1 BS 476 Pt 7 1997

    Ozone Depletion: Zero

    HCFC-CFC free

    Standard length : 6 FEET LONG CLASS “1” PIPE SECTIONS

    Purchased as Box Qty 

     

    View Product Datasheet

    Select options
    View Options

  • Actuators for PICV

    Brand: FLOWCON INTL.

     

    Settable control characteristics (linear control or equal percentage control) on modulating versions. Standard with failsafe close function

     

    View Product Datasheet      FN     FH     SM     FT

    Select options
    View Options
  • cylinder mounting bracket

    Cylinder Mounting Bracket

    Brand: PYROCHEM

    Vertical bracketing of the PCL-160, PCL-300 and PCL-460 is provided by the Model MB-15 bracket kit . Vertical bracketing of the PCL-600 is provided by the Model MB-1 bracket kit . These kits must be ordered separately with each cylinder/valve assembly. Cylinder installation instructions are provided in the installation section of this manual.

    • Cylinder Bracket
    • These kits must be ordered separately with each cylinder/valve assembly
    • Cylinder installation instructions are provided in the installation section of this manual.

    View Product Datasheet

    QR 262.00 – QR 275.00
    Select options
    View Options
  • Pyrochem Nozzle

    Nozzle

    Brand: PYROCHEM

    Nozzles have been developed for appliance, plenum, and duct applications. All nozzles have a specific flow point value and are supplied with metal blow-off caps to prevent clogging. Each nozzle is stamped with the model number.

    View Product Datasheet

    Select options
    View Options
  • Agent Cylinder With Valve

    Agent Cylinder With Valve

    Brand: PYROCHEM

    The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure

    • Meets the requirements of the Building Officials and Code Administrators (BOCA)
    • Meets the requirements of the International Building Code (IBC)
    • Approved by the City of New York Material and Equipment

     

    View Product Datasheet

    QR 2,445.00
    Select options
    View Options

  • Wet Chemical Fire Extinguishers

    Brand: SFFECO

    Wet chemical extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers.

    • All metal valve construction
    • Swivel connection on hose allows nozzle to be oriented for proper use
    • Nozzle grip design with 45° angle for easy “overhead” application
    • Low PH agent discharged as fine mist helps prevent grease splash and re-flash while cooling the appliance
    • Precise extinguishing agent application no dry chemical to clean up
    • Excellent for use on all cooking appliances including solid fuel charbroilers
    • Tested on commercial deep fat fryers to  ul 711 test protocol and safe to use on class c fires
    • Class 2a rated to meet fire code occupancy hazard requirements
    • Bar coded and bi-lingual labels

    View Product Datasheet

    Select options
    View Options

  • Pressure Independent Control ...

    Brand: FLOWCON INTL.

    FLOWCON PRESSURE INDEPENDENT CONTROL VALVE, FIXED FEMALE BY FEMALE THREADED, PRESSURE/TEMPERATURE PLUGS (STANDARD) HIGH FLOW

    The Flowcon PICV is designed as a 3-in-1 solution combining a full stroke modulation control valve, an automatic balancing valve, and a differential pressure control valve

     

    View Product Datasheet

    Select options
    View Options
  • SFFECO Fire Extinguisher

    Wet Chemical Fire Extinguishers

    Brand: SFFECO

    Wet Chemical Fire Extinguishers use a film forming base with additional chemicals and micro drop mist nozzle technology. The agent forms a mild foam surface over the hot oil but not a crust or foam mess like most other agents. The extinguishing is through smothering initially and cooling through heat absorption through high volume micro drops and a chemical reaction.

    CLASSES OF FIRE

     

    View Product Datasheet

    Select options
    View Options

  • Bye-Pass Assembly

    Brand: FLOWCON INTL.
    For either system by-pass application, Flowcon recommends a combination of automatic/dynamic balancing and 3-way control with focus on indoor climate and reduced energy consumption

    FLOWCON FCU LINK WITH BYPASS ISOLATION VALVES, IVC STRAINER, AND FLOWCON PICV FIXED FMXFM WITH P/T PLUGS, SS FLEXIBLE CONNECTOR & INSULATION

     

     

    View Product Datasheet     BY-PASS ASSY

    QR 296.00 – QR 710.00
    Select options
    View Options

Main Menu

💬 Need help?