-
Water Flow Switch
The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.
- The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
- It is UL Listed and FM Approved for use on steel pipe.
- Non – corrosive sleeve factory installed in saddle
View Product Datasheet
QR 342.00 – QR 435.00View Options -
Pressure Switch
The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
View Product Datasheet
QR 230.00View Options -
OS and Y Gate Valves
Mueller 2300 Series Resilient Wedge Gate Valves are intended for use in potable water distribution or fire protection systems.
- UL 262 Listed and FM 1120/1130 Approved and certified to ANSI/NSF 61 & 372
- Epoxy Coated interior and exterior surfaces
- Outside Screw & Yoke (O.S.&Y)
- Adjustable packing
- Rubber encapsulated iron wedge
- Hand wheel – open left or open right
View Product Datasheet
-
Tamper Switch
The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.
The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types
QR 210.00View Options -
Rubber Lined Split Clamps
A Convenient and effective means of preventing crushing of pipe supports of Chilled Water, Condenser water and Domestic hot/cold water installations. Available for any pipe size and insulation thickness,
View Product Datasheet
QR 1.00 – QR 4.55View Options -
Abort Switch
Single-gang size; includes 3 position contact block housing with 1 contact block UL, ULC, CSFM listed.
View Product Datasheet
QR 381.00View Options -
Basic Control Unit Modules
4010 control panel Basic Control Unit with 2 x 40 LCD Operator Interface and (1) Two-loop Isolated IDNet+ Communications Channel, Class A or Class B operation, with support for up to 248 addressable IDNet points
View Product Datasheet
QR 4,500.00 – QR 5,262.00View Options -
Switch Input Module
These remote annunciator graphic control modules complement Simplex 4007ES, 4010ES, 4100ES, and 4100U (and other installed legacy panels) by providing LED/lamp/relay drivers and switch inputs to allow custom graphic displays to be designed for specific facility requirements, such as for smoke control (UUKL) systems.
View Product Datasheet
-
Multi-Candela Strobes
Multi-candela strobe with intensity selectable as: 15, 30, 75, or 110 candela; synchronized flash rate.
- Simplex fire alarm control panels with NACs selected to provide strobe synchronization or SmartSync two-wire control
- Ceiling mount strobes installed using standard single gang electrical boxes.
- Rear of housing does not extend into box
View Product Datasheet
-
Wet Chemical Fire Extinguishers
Wet chemical extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers.
- All metal valve construction
- Swivel connection on hose allows nozzle to be oriented for proper use
- Nozzle grip design with 45° angle for easy “overhead” application
- Low PH agent discharged as fine mist helps prevent grease splash and re-flash while cooling the appliance
- Precise extinguishing agent application no dry chemical to clean up
- Excellent for use on all cooking appliances including solid fuel charbroilers
- Tested on commercial deep fat fryers to ul 711 test protocol and safe to use on class c fires
- Class 2a rated to meet fire code occupancy hazard requirements
- Bar coded and bi-lingual labels
View Product Datasheet
QR 280.00View Options -
Flashing Strobe
TrueAlert ES addressable strobes are individually addressed visible notification appliances that receive power, supervision, and control signals from the Simplex fire alarm control panel providing IDNAC Signaling Line Circuits (SLCs).
View Product Datasheet
-
Wet Chemical Fire Extinguishers
Wet Chemical Fire Extinguishers use a film forming base with additional chemicals and micro drop mist nozzle technology. The agent forms a mild foam surface over the hot oil but not a crust or foam mess like most other agents. The extinguishing is through smothering initially and cooling through heat absorption through high volume micro drops and a chemical reaction.
CLASSES OF FIRE
View Product Datasheet
QR 280.00View Options -
Surge Protector
DITEK’s DTK-HW Series of surge protective devices are designed and manufactured to meet the standards of the life safety industry and are widely used to protect fire alarm panels and other dedicated branch circuit loads.
View Product Datasheet
-