31Products found
View
Filter

  • Carrier Wall split unit 1.5 t...

    Brand: Carrier
    High Wall split unit , 2 TR / 6 star / R-410 a refrigerant / Rotary Compressor

     

    View Product Datasheet

    QR 2,280.00 – QR 2,850.00
    Select options
    View Options

  • Carrier Wall split unit 2.5 ton

    Brand: Carrier
    High Wall split unit Model No 38KHB030HN/42KHB030HN , 2.5TR / 6 star / R-410 a refrigerant / Rotary Compressor

     

    View Product Datasheet

    QR 3,925.00
    Select options
    View Options

  • Upright Sprinkler

    Brand: Tyco

    The TYCO Series TY-B, 5.6 K-factor, Upright (TY315) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.

    • All hazard
    • Discharges a hemispherical water spray pattern in the area beneath the sprinkler
    • Small frame, narrow profile bulb
    • Designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, chemical plants, etc.

     

    View Product Datasheet

    Select options
    View Options

  • Sidewall Sprinkler

    Brand: Tyco

    The TYCO Series TY 5.6 K-factor, Horizontal Sidewall Sprinklers are standard response, standard coverage decorative 5 mm glass bulb type spray sprinklers designed for use in light and ordinary hazard, commercial occupancies such as banks, hotels, and shopping malls.

    • Light hazard/Ordinary hazard
    • Small frame
    • Unique deflector design of the horizontal sidewall sprinkler results in smaller profile
    • Designed for installation along a wall or the side of a beam just beneath a smooth ceiling
    • Water discharge is directed primarily outward and downward in a quarter spherical pattern
    • Sidewall sprinklers are often used in lieu of standard pendent or upright sprinklers due to building construction, economic considerations, or aesthetics
    • Special deflector on the vertical sidewall sprinkler allows it to be installed in either a pendent or upright position

     

    View Product Datasheet    

    Select options
    View Options

  • Standard Air Louvers Model FAL

    Brand: JMC (formerly KMC Qatar)

    KMC Air Louvers are designed for both intake and exhaust air service for commercial & Industrial applications. 

    The fresh air louver is used to supply fresh air to the buildings or Air Handling Units (AHU). 

    Louvers are designed and manufactured for use in external applications. 

    Blades are fixed and at 45deg to protect against ingress of rain water. 

     

    View Product Datasheet

    QR 48.00 – QR 209.00
    Select options
    View Options

  • Pressure Independent VAV unit...

    Brand: JMC (formerly KMC Qatar)

    KSQ terminals are AHRI Certified and are tested in accordance with AHRI Standard 880.  

    Optional factory installed electric heaters and integral sound attenuators for ultra-quiet performance are also  available . 

    Note: The unit is supplied as a VAV box only . Controller and actuator to be provided by contractor .

     

     

     

    View Product Datasheet

    Select options
    View Options

  • Curtain Fire Damper (UL 555 &...

    Brand: JMC (formerly KMC Qatar)

    The fire damper is intended to restrict the passage of flame; it shall consist of UL listed fusible link rated to 165˚F which shall release the curtain blades in the event of fire. The standard installation requires that the damper is positioned so that the closed plane of the blades is within the fire rated masonry/concrete barrier. 

    For non-standard construction & for more details consult our sales team. 

    View Product Datasheet     17S     17 D     38 S    38 D

    QR 148.25 – QR 424.00
    Select options
    View Options

  • Combination Fire-Smoke Damper...

    Brand: JMC (formerly KMC Qatar)

    Combination Fire Smoke dampers are designed to prevent the spread of fire and smoke through the ventilation ducts in the HVAC systems. 

     

    All the Combination Fire Smoke dampers are UL certified and QCDD approved. 

     

     View Product Datasheet     MA1     LA1     MS1     MT1

    Select options
    View Options

  • By-Pass VAV unit (Model: KME)

    Brand: JMC (formerly KMC Qatar)

    By-pass VAV terminals consist of a single primary air damper that shall proportion the total primary air through the terminal to either the ceiling plenum or the space as dictated by the space thermostat demand. These units are available with various casing materials & treatments with factory mounted actuators as required. 

    Note : The unit is supplied as VAV box only. Controller & actuator shall be provided by the contractor.

     

    View Product Datasheet

    Select options
    View Options

  • Linear Bar Grilles

    Brand: JMC (formerly KMC Qatar)

    KMC Linear Bar Grilles are designed to have combined benefits of architectural beauty with performance versatility. These Grilles are an excellent choice for applications where they are exposed and accessible to heavy traffic

    View Product Datasheet

    QR 51.30 – QR 210.60
    Select options
    View Options

  • Single Deflection Grilles (Mo...

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     JMC Grilles and Registers have adjustable louvers and are available in single deflection models. The Single deflection grilles are designed to have one set of blades in the horizontal or vertical orientation. Air pattern is adjustable in one plane only. The Horizontal type provides the control over the deflection of the air pattern on adjustments whereas the vertical type provides the spread control of the air pattern reducing both throw and drop. 

     

    View Product Datasheet

    QR 12.00 – QR 94.00
    Select options
    View Options

  • Sand Louvers Model KSTL

    Brand: JMC (formerly KMC Qatar)

    The Sand Trap Louvers Model KSTL are designed for usage in serving as a Pre – Filter element in  dusty conditions. It has a degree of separation of sand and large dust particles, even in cases  of high dust concentrations. The vertically arranged sections and holes for sand drainage ensure the sand trap louver is self- cleaning and maintenance free. The sand trap louver is designed to separate large particles at low air velocities, thus avoiding excessive dust loading on conventional plant filters. It is not intended as a substitute for conventional supply air filtration. 

     

    View Product Datasheet

    Select options
    View Options
  • grilles

    Egg Crate Grilles (Model: KECG)

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     JMC Return / Exhaust Grilles utilize core of cubical grid and mostly used where maximum free area is desired and “see through” is not a concern. These Grilles are typically used in ceiling applications where “see through” sight lines are minimized to directly below the grille. Recommended for general return or exhaust of room air. 

     

    View Product Datasheet

     

    QR 28.00 – QR 233.00
    Select options
    View Options

  • Door Grille (Model: XNSA)

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC air transfer Grilles or Door grilles are typically used indoors and partitions to allow airflow to a space that is not directly served by a ducted source of supply air or a ducted outlet for return or exhaust air. These Door / Wall Grilles offer the largest free area possible with a complete sight proof or lightproof core. 

     

    View Product Datasheet

    QR 32.00 – QR 210.00
    Select options
    View Options

  • Spot Diffuser (Model: SPD)

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC Spot diffusers are recommended for use in large spaces such as malls, exhibit hall, etc., Where directional control of conditioned air is of very much importance. The adjustable nozzle models make it possible to adapt the jet discharge angle to suit different operating conditions. 

     

    View Product Datasheet

    Select options
    View Options

  • Jet Diffuser (Model: KDJ)

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish available as option. 

     

    JMC Jet diffuser is a high capacity diffuser with jet-type airflow specifically designed for spot heating or cooling in high ceiling applications. The elegant design is best suited for an architectural high-end appearance and provides a modern alternative to any traditional diffusers while upholding the trusted performance characteristics. 

     

    View Product Datasheet

    QR 234.00 – QR 1,496.00
    Select options
    View Options
  • cylinder mounting bracket

    Cylinder Mounting Bracket

    Brand: PYROCHEM

    Vertical bracketing of the PCL-160, PCL-300 and PCL-460 is provided by the Model MB-15 bracket kit . Vertical bracketing of the PCL-600 is provided by the Model MB-1 bracket kit . These kits must be ordered separately with each cylinder/valve assembly. Cylinder installation instructions are provided in the installation section of this manual.

    • Cylinder Bracket
    • These kits must be ordered separately with each cylinder/valve assembly
    • Cylinder installation instructions are provided in the installation section of this manual.

    View Product Datasheet

    Select options
    View Options
  • Pyrochem Nozzle

    Nozzle

    Brand: PYROCHEM

    Nozzles have been developed for appliance, plenum, and duct applications. All nozzles have a specific flow point value and are supplied with metal blow-off caps to prevent clogging. Each nozzle is stamped with the model number.

    View Product Datasheet

    Select options
    View Options
  • Agent Cylinder With Valve

    Agent Cylinder With Valve

    Brand: PYROCHEM

    The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure

    • Meets the requirements of the Building Officials and Code Administrators (BOCA)
    • Meets the requirements of the International Building Code (IBC)
    • Approved by the City of New York Material and Equipment

     

    View Product Datasheet

    QR 2,445.00
    Select options
    View Options

  • Duct Access Door (Model: AD*)

    Brand: JMC (formerly KMC Qatar)

    Duct access doors are manufactured in accordance to SMACNA standard using high quality materials to provide access for life safety damper inspection, controls adjusting, and many other applications in HVAC ducts. 

     

    View Product Datasheet

     

    QR 31.03 – QR 102.85
    Select options
    View Options
  • KSLAD, KRLAD

    Linear Slot Diffuser (Model:...

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    Linear Slot Diffusers manufactured by KMC have been designed to satisfy architectural concepts that require continuous length applications without compromising air distribution performance. These diffusers utilizes an adjustable vane in each slot to control the direction of air discharge either parallel with or perpendicular to its face surface. The adjustment from the face of the diffuser allows for pattern control in a full 180 degree range for either right or left parallel, intermediate or perpendicular 

     

    View Product Datasheet

    QR 44.80 – QR 318.56
    Select options
    View Options

  • Double Deflection Grilles (M...

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC supply Grilles and Registers have adjustable louvers and are available in double deflection models. The Double deflection grilles are designed to have two sets of blades in both the horizontal or vertical orientation with air pattern being adjustable in both horizontal and vertical planes. Adjustment of the Horizontal blades provides the control over the deflection of the air pattern. Adjustment of the vertical blades provides the spread control of the air pattern, reducing both throw and drop.  

     

    View Product Datasheet

    Select options
    View Options

  • Exhaust Grilles (Model: KX3HD)

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

     KMC Return / Exhaust Grilles utilize core of parallel fixed blades set at a deflection, generally 45° from horizontal to provide minimum “see through”. These Grilles are mostly utilized for side wall application with blade deflection upward in high applications and down in lower applications. 

     

    View Product Datasheet

    Select options
    View Options

  • Volume Control Dampers

    Brand: JMC (formerly KMC Qatar)

    Volume control Dampers may be installed vertically or horizontally . Suitable for Drive and Slip duct connections

    Can be installed in Vertical and Horizontal duct branches.  

     

    View Product Datasheet     Flanged      Flat Frame

    Select options
    View Options

Main Menu

💬 Need help?