-
Water Flow Switch
The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.
- The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
- It is UL Listed and FM Approved for use on steel pipe.
- Non – corrosive sleeve factory installed in saddle
View Product Datasheet
-
Pressure Switch
The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
View Product Datasheet
QR 230.00View Options -
Swing Check Valves -WEFLO
Swing check valves, also known as backflow preventers, are important in many industries because they help fluid move in one direction while stopping it from going backwards. This helps things run smoothly and efficiently. valves feature a swinging disc on a hinge or shaft, determining their shut-off capabilities. - Complies with AWWA C508 clear waterway design
- Seating type is the resilient material to bronze seat construction
View Product Datasheet
QR 402.00View Options -
-
Pipe Insulation – FSK Faced
KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:
Faced with FSK – Pipe sections, with a factory-applied reinforced Aluminum foil covering (FSK) incorporating an overlap. Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting.
Standard length: 1.2 MTR
View Product Datasheet
-
Pipe Insulation – Aluglass Faced
KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:
Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting. Aluglass facing ensures zero water vapor permeability, puncture resistance, and eliminates the need for external weather protection
View Product Datasheet
-
Tamper Switch
The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.
The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types
-
Standard Air Louvers Model FAL
KMC Air Louvers are designed for both intake and exhaust air service for commercial & Industrial applications.
The fresh air louver is used to supply fresh air to the buildings or Air Handling Units (AHU).
Louvers are designed and manufactured for use in external applications.
Blades are fixed and at 45deg to protect against ingress of rain water.
View Product Datasheet
QR 48.00 – QR 209.00View Options -
Pressure Independent VAV unit...
KSQ terminals are AHRI Certified and are tested in accordance with AHRI Standard 880.
Optional factory installed electric heaters and integral sound attenuators for ultra-quiet performance are also available .
Note: The unit is supplied as a VAV box only . Controller and actuator to be provided by contractor .
View Product Datasheet
QR 238.00 – QR 498.00View Options -
Curtain Fire Damper (UL 555 &...
The fire damper is intended to restrict the passage of flame; it shall consist of UL listed fusible link rated to 165˚F which shall release the curtain blades in the event of fire. The standard installation requires that the damper is positioned so that the closed plane of the blades is within the fire rated masonry/concrete barrier.
For non-standard construction & for more details consult our sales team.
-
-
By-Pass VAV unit (Model: KME)
By-pass VAV terminals consist of a single primary air damper that shall proportion the total primary air through the terminal to either the ceiling plenum or the space as dictated by the space thermostat demand. These units are available with various casing materials & treatments with factory mounted actuators as required.
Note : The unit is supplied as VAV box only. Controller & actuator shall be provided by the contractor.
View Product Datasheet
QR 190.00 – QR 532.00View Options -
Single Deflection Grilles (Mo...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
JMC Grilles and Registers have adjustable louvers and are available in single deflection models. The Single deflection grilles are designed to have one set of blades in the horizontal or vertical orientation. Air pattern is adjustable in one plane only. The Horizontal type provides the control over the deflection of the air pattern on adjustments whereas the vertical type provides the spread control of the air pattern reducing both throw and drop.
View Product Datasheet
-
Sand Louvers Model KSTL
The Sand Trap Louvers Model KSTL are designed for usage in serving as a Pre – Filter element in dusty conditions. It has a degree of separation of sand and large dust particles, even in cases of high dust concentrations. The vertically arranged sections and holes for sand drainage ensure the sand trap louver is self- cleaning and maintenance free. The sand trap louver is designed to separate large particles at low air velocities, thus avoiding excessive dust loading on conventional plant filters. It is not intended as a substitute for conventional supply air filtration.
View Product Datasheet
QR 30.00 – QR 2,548.00View Options -
Egg Crate Grilles (Model: KECG)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
JMC Return / Exhaust Grilles utilize core of cubical grid and mostly used where maximum free area is desired and “see through” is not a concern. These Grilles are typically used in ceiling applications where “see through” sight lines are minimized to directly below the grille. Recommended for general return or exhaust of room air.
View Product Datasheet
QR 28.00 – QR 233.00View Options -
Door Grille (Model: XNSA)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC air transfer Grilles or Door grilles are typically used indoors and partitions to allow airflow to a space that is not directly served by a ducted source of supply air or a ducted outlet for return or exhaust air. These Door / Wall Grilles offer the largest free area possible with a complete sight proof or lightproof core.
View Product Datasheet
QR 32.00 – QR 210.00View Options -
Spot Diffuser (Model: SPD)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC Spot diffusers are recommended for use in large spaces such as malls, exhibit hall, etc., Where directional control of conditioned air is of very much importance. The adjustable nozzle models make it possible to adapt the jet discharge angle to suit different operating conditions.
View Product Datasheet
QR 192.00 – QR 525.00View Options -
Jet Diffuser (Model: KDJ)
Finish: Powder coated to RAL 9010 as standard. Other finish available as option.
JMC Jet diffuser is a high capacity diffuser with jet-type airflow specifically designed for spot heating or cooling in high ceiling applications. The elegant design is best suited for an architectural high-end appearance and provides a modern alternative to any traditional diffusers while upholding the trusted performance characteristics.
View Product Datasheet
QR 234.00 – QR 1,496.00View Options -
Duct Access Door (Model: AD*)
Duct access doors are manufactured in accordance to SMACNA standard using high quality materials to provide access for life safety damper inspection, controls adjusting, and many other applications in HVAC ducts.
View Product Datasheet
QR 31.03 – QR 102.85View Options -
Linear Slot Diffuser (Model:...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
Linear Slot Diffusers manufactured by KMC have been designed to satisfy architectural concepts that require continuous length applications without compromising air distribution performance. These diffusers utilizes an adjustable vane in each slot to control the direction of air discharge either parallel with or perpendicular to its face surface. The adjustment from the face of the diffuser allows for pattern control in a full 180 degree range for either right or left parallel, intermediate or perpendicular
View Product Datasheet
QR 44.80 – QR 318.56View Options -
Double Deflection Grilles (M...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC supply Grilles and Registers have adjustable louvers and are available in double deflection models. The Double deflection grilles are designed to have two sets of blades in both the horizontal or vertical orientation with air pattern being adjustable in both horizontal and vertical planes. Adjustment of the Horizontal blades provides the control over the deflection of the air pattern. Adjustment of the vertical blades provides the spread control of the air pattern, reducing both throw and drop.
View Product Datasheet
QR 18.00 – QR 611.00View Options -
Exhaust Grilles (Model: KX3HD)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC Return / Exhaust Grilles utilize core of parallel fixed blades set at a deflection, generally 45° from horizontal to provide minimum “see through”. These Grilles are mostly utilized for side wall application with blade deflection upward in high applications and down in lower applications.
View Product Datasheet
QR 18.00 – QR 39.00View Options -
Volume Control Dampers
Volume control Dampers may be installed vertically or horizontally . Suitable for Drive and Slip duct connections
Can be installed in Vertical and Horizontal duct branches.
View Product Datasheet Flanged Flat Frame
QR 41.00 – QR 554.00View Options