15Products found
View
Filter

  • Ducted Split Air Conditioner

    Brand: Ruud

    Low height air handler with side-discharge condensing unit Anti-freeze temperature sensor is provided on the coil against freezing during abnormal operating conditions.

    Microprocessor Based Controller Filter drier is supplied loose as standard accessory Removable panels at the bottom of the unit that are provided for service access .

    Quick connector for interconnecting communication cable (10 meter Long) from main controller to Controller User Interface Metallic Condenser fan blades and evaporator blower ensure safety & high durability .

    High Pressure and Low Pressure safety controls are a standard feature on all the models

    2T,2.5T,3T,3.5T Download Brochure     

          4T,5T  Download Brochure

     

    Select options
    View Options

  • Wall Split Air Conditioner

    Brand: Ruud

    Developed with environment friendly R410A refrigerant. R410A refrigerant is highly efficient and has an Ozone Depletion Potential (ODP) of 0.
    Super Quiet: The in-built additional temperature sensor in the remote controller monitors the surrounding temperature. Therefore, the air-conditioner can adjust the room temperature more accurately and provide extra comfort to users.

    Quality rating : 6 star

    • Inner-grooved copper tube
    • Safety Design
    • Leakage Detection
    • Sleep Mode
    • Vector Precision Air Supply
    • T3 Tropical Compressor T3 Tropical Rotary compressor for high-efficiency and operation up to 52°C
      Rust-proof
    • Flanging Processed Plate Metal
    • Valve Protection Cover

    Introduction Download Brochure       

    Performance table & selection Download Brochure

    Select options
    View Options

  • Discharge Nozzle Brass

    Brand: Marcon Safety

    FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option

     

    View Product Datasheet

    Select options
    View Options

  • Upright Sprinkler

    Brand: Tyco

    The TYCO Series TY-B, 5.6 K-factor, Upright (TY315) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.

    • All hazard
    • Discharges a hemispherical water spray pattern in the area beneath the sprinkler
    • Small frame, narrow profile bulb
    • Designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, chemical plants, etc.

     

    View Product Datasheet

    Select options
    View Options

  • Sidewall Sprinkler

    Brand: Tyco

    The TYCO Series TY 5.6 K-factor, Horizontal Sidewall Sprinklers are standard response, standard coverage decorative 5 mm glass bulb type spray sprinklers designed for use in light and ordinary hazard, commercial occupancies such as banks, hotels, and shopping malls.

    • Light hazard/Ordinary hazard
    • Small frame
    • Unique deflector design of the horizontal sidewall sprinkler results in smaller profile
    • Designed for installation along a wall or the side of a beam just beneath a smooth ceiling
    • Water discharge is directed primarily outward and downward in a quarter spherical pattern
    • Sidewall sprinklers are often used in lieu of standard pendent or upright sprinklers due to building construction, economic considerations, or aesthetics
    • Special deflector on the vertical sidewall sprinkler allows it to be installed in either a pendent or upright position

     

    View Product Datasheet    

    Select options
    View Options
  • cylinder mounting bracket

    Cylinder Mounting Bracket

    Brand: PYROCHEM

    Vertical bracketing of the PCL-160, PCL-300 and PCL-460 is provided by the Model MB-15 bracket kit . Vertical bracketing of the PCL-600 is provided by the Model MB-1 bracket kit . These kits must be ordered separately with each cylinder/valve assembly. Cylinder installation instructions are provided in the installation section of this manual.

    • Cylinder Bracket
    • These kits must be ordered separately with each cylinder/valve assembly
    • Cylinder installation instructions are provided in the installation section of this manual.

    View Product Datasheet

    Select options
    View Options
  • Pyrochem Nozzle

    Nozzle

    Brand: PYROCHEM

    Nozzles have been developed for appliance, plenum, and duct applications. All nozzles have a specific flow point value and are supplied with metal blow-off caps to prevent clogging. Each nozzle is stamped with the model number.

    View Product Datasheet

    Select options
    View Options
  • Agent Cylinder With Valve

    Agent Cylinder With Valve

    Brand: PYROCHEM

    The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure

    • Meets the requirements of the Building Officials and Code Administrators (BOCA)
    • Meets the requirements of the International Building Code (IBC)
    • Approved by the City of New York Material and Equipment

     

    View Product Datasheet

    QR 2,445.00
    Select options
    View Options

  • Container Label

    Brand: Marcon Safety

     

    The container label detailsthe weight of NOVEC™ 1230 contained, empty weight, fill density and charge date.

     

    View Product Datasheet

    QR 286.00
    Select options
    View Options

  • Hose Male Adaptor

    Brand: Marcon Safety

    The male pilot hose connector is used to connect two pilot hoses together for systems where a second container of  a different size is used to protect a different enclosure. 

     

    View Product Datasheet

    Select options
    View Options

  • Manual/Pneumatic Actuator

    Brand: Marcon Safety

    This Actuator is Used for  mechanical or pneumatic operating system at the container position and is fitted to the top of the valve assembly or removable electrical actuator.

     

    View product Datasheet

    QR 334.00
    Select options
    View Options

  • Manifold Inlet

    Brand: Marcon Safety

    Manifold inlets are available for the construction of system manifolds. Threaded Inlet for Manifolds

     

    View Product Datasheet

    QR 382.00
    Select options
    View Options

  • Concealed Pendent Sprinkler

    Brand: Tyco

    The TYCO Series RFII 5.6 K-factor, “Royal Flush II” Concealed Pendent Standard Response (5-mm bulb), is a decorative sprinkler featuring a flat cover plate designed to conceal the sprinkler. These sprinklers are optimal for architecturally sensitive areas such as hotel lobbies, office buildings, churches, and restaurants.

    Each sprinkler includes a Cover Plate/Retainer Assembly and a Sprinkler/Support Cup Assembly.

     

    View Product Datasheet

    QR 32.00 – QR 48.00
    Select options
    View Options

  • Pendent Sprinkler

    Brand: Tyco

    The TYCO Series TY-B, 5.6 K-factor, Pendent (TY325) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.

     

    View Product Datasheet       TY3251

    Select options
    View Options

  • Valve Single Tank Adaptors

    Brand: Marcon Safety

     

    When a single 343 litre container is being used without a manifold, three swivel adaptors are available for  connection to the discharge outlet

     

    View Product Datasheet

    QR 657.00
    Select options
    View Options

Main Menu

💬 Need help?