-
Grooved Check Valve
The TYCO Model CV-1F Grooved End Swing Check Valves are compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction.
View Product Datasheet
QR 525.00 – QR 1,245.00View Options -
Pressure Reducing Valve
Cla-Val 90-21 Pressure Reducing Valves are indispensable in any fire protection system.
- Globe or Angle Pattern
- Proven Reliable Design
- Available in Cast Bronze, Ductile Iron and Cast Steel
- Accurate Pressure Control
- In Line Service
- Grooved Ends
View Product Datasheet
-
Wet Alarm Valves
The TYCO Model Alarm Check Valves are intended for use in wet pipe (automatic sprinkler) fire protection systems.
View Product Datasheet
QR 1,213.00 – QR 2,685.00View Options -
Pressure Tank
Wates Pressure tanks used for drinking water level risers and distribution systems are required to maintain pressure in the system, optimize pump operation, guarantee a water reserve and protect against water impacts.
View Product Datasheet
QR 2,360.00 – QR 3,800.00View Options -
Refrigeration Copper Coils
Copper Pipes & Coils manufactured to ASTM B743 standards are suitable for gas applications and other high-pressure refrigerants.
ACR Copper Coils & Pipes are dehydrated, degreased, purged with nitrogen, and capped to maintain the internal cleanliness of the product.
Coil Length: 15 meters
View Product Datasheet
QR 82.00 – QR 165.00View Options -
Rubber Insulation For Duct – ...
ARMAFLEX CLASS O (AC) RUBBER INSULATION
Insulation/protection to control condensation, reduce energy loss and protect against frost for air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for air HVAC Ducts and is available in various thicknesses & options with and without factory-applied self-adhesive property.
View Product Datasheet
-
Rubber Insulation for Pipe – ...
ARMAFLEX RUBBER INSULATION CLASS O (AC)
Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning, and refrigerated pipework
Note : Standard 2 meter length unit Qty , Price is per Mtr
View Product Datasheet
-
Rubber Insulation for Pipe -AP
ARMAFLEX AP RUBBER INSULATION
Armaflex AP Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning ductwork, and refrigerated pipework. This grade of Insulation has in build micro ban antimicrobial technology & has better fire properties and complies with ASTM E-84 standard.
Standard Length: 2 Mtr pc Qty ,Price is per Mtr.
View Product Datasheet
QR 10.15 – QR 31.53View Options -
Butterfly Valve Grooved End
The TYCO Models BFV-300 and BFV300C Grooved End Butterfly Valves are indicating type valves designed for use in fire protection systems where a visual indication of open or closed valve condition is required
- Designed for use in fire protection systems
- UL and ULC Listed
- FM Approved
View Product Datasheet
-
Standard Air Louvers Model FAL
KMC Air Louvers are designed for both intake and exhaust air service for commercial & Industrial applications.
The fresh air louver is used to supply fresh air to the buildings or Air Handling Units (AHU).
Louvers are designed and manufactured for use in external applications.
Blades are fixed and at 45deg to protect against ingress of rain water.
View Product Datasheet
QR 48.00 – QR 209.00View Options -
Pressure Independent VAV unit...
KSQ terminals are AHRI Certified and are tested in accordance with AHRI Standard 880.
Optional factory installed electric heaters and integral sound attenuators for ultra-quiet performance are also available .
Note: The unit is supplied as a VAV box only . Controller and actuator to be provided by contractor .
View Product Datasheet
QR 238.00 – QR 498.00View Options -
Curtain Fire Damper (UL 555 &...
The fire damper is intended to restrict the passage of flame; it shall consist of UL listed fusible link rated to 165˚F which shall release the curtain blades in the event of fire. The standard installation requires that the damper is positioned so that the closed plane of the blades is within the fire rated masonry/concrete barrier.
For non-standard construction & for more details consult our sales team.
-
-
By-Pass VAV unit (Model: KME)
By-pass VAV terminals consist of a single primary air damper that shall proportion the total primary air through the terminal to either the ceiling plenum or the space as dictated by the space thermostat demand. These units are available with various casing materials & treatments with factory mounted actuators as required.
Note : The unit is supplied as VAV box only. Controller & actuator shall be provided by the contractor.
View Product Datasheet
QR 190.00 – QR 532.00View Options -
Single Deflection Grilles (Mo...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
JMC Grilles and Registers have adjustable louvers and are available in single deflection models. The Single deflection grilles are designed to have one set of blades in the horizontal or vertical orientation. Air pattern is adjustable in one plane only. The Horizontal type provides the control over the deflection of the air pattern on adjustments whereas the vertical type provides the spread control of the air pattern reducing both throw and drop.
View Product Datasheet
-
Sand Louvers Model KSTL
The Sand Trap Louvers Model KSTL are designed for usage in serving as a Pre – Filter element in dusty conditions. It has a degree of separation of sand and large dust particles, even in cases of high dust concentrations. The vertically arranged sections and holes for sand drainage ensure the sand trap louver is self- cleaning and maintenance free. The sand trap louver is designed to separate large particles at low air velocities, thus avoiding excessive dust loading on conventional plant filters. It is not intended as a substitute for conventional supply air filtration.
View Product Datasheet
QR 30.00 – QR 2,548.00View Options -
Egg Crate Grilles (Model: KECG)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
JMC Return / Exhaust Grilles utilize core of cubical grid and mostly used where maximum free area is desired and “see through” is not a concern. These Grilles are typically used in ceiling applications where “see through” sight lines are minimized to directly below the grille. Recommended for general return or exhaust of room air.
View Product Datasheet
QR 28.00 – QR 233.00View Options -
Door Grille (Model: XNSA)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC air transfer Grilles or Door grilles are typically used indoors and partitions to allow airflow to a space that is not directly served by a ducted source of supply air or a ducted outlet for return or exhaust air. These Door / Wall Grilles offer the largest free area possible with a complete sight proof or lightproof core.
View Product Datasheet
QR 32.00 – QR 210.00View Options -
Spot Diffuser (Model: SPD)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC Spot diffusers are recommended for use in large spaces such as malls, exhibit hall, etc., Where directional control of conditioned air is of very much importance. The adjustable nozzle models make it possible to adapt the jet discharge angle to suit different operating conditions.
View Product Datasheet
QR 192.00 – QR 525.00View Options -
Jet Diffuser (Model: KDJ)
Finish: Powder coated to RAL 9010 as standard. Other finish available as option.
JMC Jet diffuser is a high capacity diffuser with jet-type airflow specifically designed for spot heating or cooling in high ceiling applications. The elegant design is best suited for an architectural high-end appearance and provides a modern alternative to any traditional diffusers while upholding the trusted performance characteristics.
View Product Datasheet
QR 234.00 – QR 1,496.00View Options -
Duct Access Door (Model: AD*)
Duct access doors are manufactured in accordance to SMACNA standard using high quality materials to provide access for life safety damper inspection, controls adjusting, and many other applications in HVAC ducts.
View Product Datasheet
QR 31.03 – QR 102.85View Options -
Linear Slot Diffuser (Model:...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
Linear Slot Diffusers manufactured by KMC have been designed to satisfy architectural concepts that require continuous length applications without compromising air distribution performance. These diffusers utilizes an adjustable vane in each slot to control the direction of air discharge either parallel with or perpendicular to its face surface. The adjustment from the face of the diffuser allows for pattern control in a full 180 degree range for either right or left parallel, intermediate or perpendicular
View Product Datasheet
QR 44.80 – QR 318.56View Options -
Double Deflection Grilles (M...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC supply Grilles and Registers have adjustable louvers and are available in double deflection models. The Double deflection grilles are designed to have two sets of blades in both the horizontal or vertical orientation with air pattern being adjustable in both horizontal and vertical planes. Adjustment of the Horizontal blades provides the control over the deflection of the air pattern. Adjustment of the vertical blades provides the spread control of the air pattern, reducing both throw and drop.
View Product Datasheet
QR 18.00 – QR 611.00View Options