-
-
Rubber Lined Split Clamps
A Convenient and effective means of preventing crushing of pipe supports of Chilled Water, Condenser water and Domestic hot/cold water installations. Available for any pipe size and insulation thickness,
View Product Datasheet
QR 1.00 – QR 4.55View Options -
DZR Brass Float Valve
DZR Brass Float Valve. Supplied with locknut. Machined fixed flange on the valve body. No jam single lever action.
View Product Datasheet
QR 151.00View Options -
Automatic Heat Detector
Explosion-proof for installation in hazardous locations. Has hexagonal grip bushing with 1/2’ conduit threads for attachment to threaded hub cover of series JL fixture fitting
View Product Datasheet
QR 229.00View Options -
Pressure Independent Control ...
FLOWCON PRESSURE INDEPENDENT CONTROL VALVE, FIXED FEMALE BY FEMALE THREADED, PRESSURE/TEMPERATURE PLUGS (STANDARD) HIGH FLOW
The Flowcon PICV is designed as a 3-in-1 solution combining a full stroke modulation control valve, an automatic balancing valve, and a differential pressure control valve
View Product Datasheet
-
-
Bye-Pass Assembly
For either system by-pass application, Flowcon recommends a combination of automatic/dynamic balancing and 3-way control with focus on indoor climate and reduced energy consumption FLOWCON FCU LINK WITH BYPASS ISOLATION VALVES, IVC STRAINER, AND FLOWCON PICV FIXED FMXFM WITH P/T PLUGS, SS FLEXIBLE CONNECTOR & INSULATION
View Product Datasheet BY-PASS ASSY
-
Extention Split Pipe Clamp
Material: Malleable Iron
Function: Designed for suspending non-insulated pipe horizontally or vertically.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized.View Product Datasheet
QR 3.85 – QR 26.50View Options -
Rubber Lined Split Clamp
Standard finish: Electro-zinc plated complies with ASTM B633
Function: Designed for suppressing vibration and soundView Product Datasheet
-
U Bolt with 4 nuts
Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts
View Product Datasheet
-
Riser Clamp
A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe.
View Product Datasheet
QR 14.30 – QR 131.00View Options -
Short Insulation Protection S...
Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
Finish: Pre-GalvanizedView Product Datasheet
-
Cleivis Hanger
A Clevis Hanger provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibrati
View Product Datasheet
QR 2.86 – QR 99.50View Options