14Products found
View
Filter

  • Refrigerant Pipe Insulation

    Brand: K-Flex Isoline

    Isoline (from K-Flex) is a high-quality Class-1 Elastomeric/Rubber Insulation which is a flexible, closed-cell tube insulation product used to conserve energy and prevent condensation on piping applications.  The product’s closed-cell structure creates exceptional thermal properties that protect against moisture penetration in refrigeration tubing applications.  

    Very low thermal conductivity high water vapor diffusion resistance:  Closed-cell elastomeric insulation has a high water vapor diffusion resistance factor µ (µ>̲5000)  which minimizes water vapor penetration, giving an excellent long-term performance.

    Low flame spread: When fire tested, ISOLINE does not generate flaming droplets and  has low flame spread achieving the fire performance of Class 1

    Fire:  Class 1 BS 476 Pt 7 1997

    Ozone Depletion: Zero

    HCFC-CFC free

    Standard length : 6 FEET LONG CLASS “1” PIPE SECTIONS

    Purchased as Box Qty 

     

    View Product Datasheet

    QR 175.00
    Select options
    View Options

  • Actuators for PICV

    Brand: FLOWCON INTL.

     

    Settable control characteristics (linear control or equal percentage control) on modulating versions. Standard with failsafe close function

     

    View Product Datasheet      FN     FH     SM     FT

    QR 185.00 – QR 416.00
    Select options
    View Options

  • Pipe Insulation – FSK Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Faced with FSK – Pipe sections, with a factory-applied reinforced Aluminum foil covering (FSK) incorporating an overlap. Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting.

    Standard length: 1.2 MTR

    View Product Datasheet

    QR 14.00 – QR 195.00
    Select options
    View Options

  • Pipe Insulation – Aluglass Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting. Aluglass facing ensures zero water vapor permeability, puncture resistance, and eliminates the need for external weather protection

     

    View Product Datasheet

    QR 11.50 – QR 125.00
    Select options
    View Options
  • Simplex maintenance switch

    Abort Switch

    Brand: Simplex

    Single-gang size; includes 3 position contact block housing with 1 contact block UL, ULC, CSFM listed.

     

    View Product Datasheet

    QR 381.00
    Select options
    View Options
  • Simplex 4010

    Basic Control Unit Modules

    Brand: Simplex

    4010 control panel Basic Control Unit with 2 x 40 LCD Operator Interface and (1) Two-loop Isolated IDNet+ Communications Channel, Class A or Class B operation, with support for up to 248 addressable IDNet points

     

    View Product Datasheet

    QR 4,500.00 – QR 5,262.00
    Select options
    View Options

  • Switch Input Module

    Brand: Simplex

    These remote annunciator graphic control modules complement Simplex 4007ES, 4010ES, 4100ES, and 4100U (and other installed legacy panels) by providing LED/lamp/relay drivers and switch inputs to allow custom graphic displays to be designed for specific facility requirements, such as for smoke control (UUKL) systems.

     

    View Product Datasheet

    Select options
    View Options

  • Multi-Candela Strobes

    Brand: Simplex

    Multi-candela strobe with intensity selectable as: 15, 30, 75, or 110 candela; synchronized flash rate.

    • Simplex fire alarm control panels with NACs selected to provide strobe synchronization or SmartSync two-wire control
    • Ceiling mount strobes installed using standard single gang electrical boxes.
    • Rear of housing does not extend into box

     

    View Product Datasheet       

    Select options
    View Options

  • DZR Brass Float Valve

    Brand: Albion

    DZR Brass Float Valve. Supplied with locknut. Machined fixed flange on the valve body. No jam single lever action.

     

    View Product Datasheet

    QR 151.00
    Select options
    View Options
  • Automatic Heat Detectors

    Automatic Heat Detector

    Brand: Thermotech

    Explosion-proof for installation in hazardous locations. Has hexagonal grip bushing with 1/2’ conduit threads for attachment to threaded hub cover of series JL fixture fitting

    View Product Datasheet

    QR 229.00
    Select options
    View Options
  • Fire Alarm

    Flashing Strobe

    Brand: Simplex

    TrueAlert ES addressable strobes are individually addressed visible notification appliances that receive power, supervision, and control signals from the Simplex fire alarm control panel providing IDNAC  Signaling Line Circuits (SLCs).

     

    View Product Datasheet

    QR 141.60
    Select options
    View Options

  • Pressure Independent Control ...

    Brand: FLOWCON INTL.

    FLOWCON PRESSURE INDEPENDENT CONTROL VALVE, FIXED FEMALE BY FEMALE THREADED, PRESSURE/TEMPERATURE PLUGS (STANDARD) HIGH FLOW

    The Flowcon PICV is designed as a 3-in-1 solution combining a full stroke modulation control valve, an automatic balancing valve, and a differential pressure control valve

     

    View Product Datasheet

    QR 48.00 – QR 335.00
    Select options
    View Options

  • Beam Detector Controller

    Brand: FIRE FIGHTING ENTERPRISES

    The Fireray 5000 System is an auto-aligning, self-correcting infrared-reflective beam smoke detector.

     

    View Product Datasheet

    QR 420.00
    Select options
    View Options

  • Bye-Pass Assembly

    Brand: FLOWCON INTL.
    For either system by-pass application, Flowcon recommends a combination of automatic/dynamic balancing and 3-way control with focus on indoor climate and reduced energy consumption

    FLOWCON FCU LINK WITH BYPASS ISOLATION VALVES, IVC STRAINER, AND FLOWCON PICV FIXED FMXFM WITH P/T PLUGS, SS FLEXIBLE CONNECTOR & INSULATION

     

     

    View Product Datasheet     BY-PASS ASSY

    Select options
    View Options

Main Menu

💬 Need help?