28Products found
View
Filter
  • Discharge Nozzle Brass

    Brand: Marcon Safety

    FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option

     

    View Product Datasheet

    View Options
  • Refrigeration Copper Coils

    Copper Pipes & Coils manufactured to ASTM B743 standards are suitable for gas applications and other high-pressure refrigerants.

    ACR Copper Coils & Pipes are dehydrated, degreased, purged with nitrogen, and capped to maintain the internal cleanliness of the product.

    Coil Length: 15 meters

    View Product  Datasheet

    QR 82.00QR 165.00
    View Options
  • Pipe Insulation – Aluglass Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting. Aluglass facing ensures zero water vapor permeability, puncture resistance, and eliminates the need for external weather protection

     

    View Product Datasheet

    QR 11.50QR 125.00
    View Options
  • Pipe Insulation – FSK Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Faced with FSK – Pipe sectionswith a factory-applied reinforced Aluminum foil covering (FSK) incorporating an overlap. Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting.

    Standard length: 1.2 MTR

    View Product Datasheet

    QR 14.00QR 195.00
    View Options
  • Rubber Insulation For Duct – ...

    Brand: Armaflex

    ARMAFLEX CLASS O (AC) RUBBER INSULATION

    Insulation/protection to control condensation, reduce energy loss and protect against frost for air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for air HVAC Ducts and is available in various thicknesses & options with and without factory-applied self-adhesive property.

     

    View Product Datasheet

    QR 365.00
    View Options
  • Rubber Insulation for Pipe -AP

    Brand: Armaflex

     ARMAFLEX AP RUBBER INSULATION

    Armaflex AP Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning ductwork, and refrigerated pipework. This grade of Insulation has in build micro ban antimicrobial technology & has better fire properties and complies with ASTM E-84 standard.

     

    Standard Length: 2 Mtr pc Qty ,Price is per Mtr. 

     

    View Product Datasheet

    QR 10.15QR 31.53
    View Options
  • Rubber Insulation for Pipe – ...

    Brand: Armaflex

    ARMAFLEX RUBBER INSULATION CLASS O (AC)

    Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning, and refrigerated pipework

    Note : Standard 2 meter length unit Qty , Price is per Mtr

    View Product Datasheet

    QR 5.40QR 18.00
    View Options
  • Upright Sprinkler

    Brand: Tyco

    The TYCO Series TY-B, 5.6 K-factor, Upright (TY315) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.

    • All hazard
    • Discharges a hemispherical water spray pattern in the area beneath the sprinkler
    • Small frame, narrow profile bulb
    • Designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, chemical plants, etc.

     

    View Product Datasheet

    QR 24.40
    View Options
  • Sidewall Sprinkler

    Brand: Tyco

    The TYCO Series TY 5.6 K-factor, Horizontal Sidewall Sprinklers are standard response, standard coverage decorative 5 mm glass bulb type spray sprinklers designed for use in light and ordinary hazard, commercial occupancies such as banks, hotels, and shopping malls.

    • Light hazard/Ordinary hazard
    • Small frame
    • Unique deflector design of the horizontal sidewall sprinkler results in smaller profile
    • Designed for installation along a wall or the side of a beam just beneath a smooth ceiling
    • Water discharge is directed primarily outward and downward in a quarter spherical pattern
    • Sidewall sprinklers are often used in lieu of standard pendent or upright sprinklers due to building construction, economic considerations, or aesthetics
    • Special deflector on the vertical sidewall sprinkler allows it to be installed in either a pendent or upright position

     

    View Product Datasheet    

    QR 29.00
    View Options
  • Simplex maintenance switch

    Abort Switch

    Brand: Simplex

    Single-gang size; includes 3 position contact block housing with 1 contact block UL, ULC, CSFM listed.

     

    View Product Datasheet

    QR 381.00
    View Options
  • Simplex 4010

    Basic Control Unit Modules

    Brand: Simplex

    4010 control panel Basic Control Unit with 2 x 40 LCD Operator Interface and (1) Two-loop Isolated IDNet+ Communications Channel, Class A or Class B operation, with support for up to 248 addressable IDNet points

     

    View Product Datasheet

    View Options
  • Multi-Candela Strobes

    Brand: Simplex

    Multi-candela strobe with intensity selectable as: 15, 30, 75, or 110 candela; synchronized flash rate.

    • Simplex fire alarm control panels with NACs selected to provide strobe synchronization or SmartSync two-wire control
    • Ceiling mount strobes installed using standard single gang electrical boxes.
    • Rear of housing does not extend into box

     

    View Product Datasheet       

    View Options
  • Hose Male Adaptor

    Brand: Marcon Safety

    The male pilot hose connector is used to connect two pilot hoses together for systems where a second container of  a different size is used to protect a different enclosure. 

     

    View Product Datasheet

    QR 43.00
    View Options
  • Manual/Pneumatic Actuator

    Brand: Marcon Safety

    This Actuator is Used for  mechanical or pneumatic operating system at the container position and is fitted to the top of the valve assembly or removable electrical actuator.

     

    View product Datasheet

    QR 334.00
    View Options
  • Supervisory Pressure Switch

    Brand: Marcon Safety

    A low pressure warning switch is fitted to every container and must be ordered separately. The device continuously monitors the container pressure and in the event of the pressure dropping below 20 bar (290 psi) the switch operates to enable the condition to be signaled to a control unit

     

    View Product Datasheet

    QR 157.00
    View Options
  • Manifold Inlet

    Brand: Marcon Safety

    Manifold inlets are available for the construction of system manifolds. Threaded Inlet for Manifolds

     

    View Product Datasheet

    QR 382.00
    View Options
  • Concealed Pendent Sprinkler

    Brand: Tyco

    The TYCO Series RFII 5.6 K-factor, “Royal Flush II” Concealed Pendent Standard Response (5-mm bulb), is a decorative sprinkler featuring a flat cover plate designed to conceal the sprinkler. These sprinklers are optimal for architecturally sensitive areas such as hotel lobbies, office buildings, churches, and restaurants.

    Each sprinkler includes a Cover Plate/Retainer Assembly and a Sprinkler/Support Cup Assembly.

     

    View Product Datasheet

    QR 32.00QR 48.00
    View Options
  • Pendent Sprinkler

    Brand: Tyco

    The TYCO Series TY-B, 5.6 K-factor, Pendent (TY325) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.

     

    View Product Datasheet       TY3251

    QR 23.00QR 30.00
    View Options
  • Valve Single Tank Adaptors

    Brand: Marcon Safety

     

    When a single 343 litre container is being used without a manifold, three swivel adaptors are available for  connection to the discharge outlet

     

    View Product Datasheet

    QR 657.00
    View Options
  • XLPE Pipe Insulation

    Brand: Aerolam

    AEROLAM XLPE as pipe insulation is specially designed for the HVAC segment and for applications in the Textile and Building industry, for thermal & acoustic insulation. AEROLAM XLPE conforms to Class 1 for Surface Spread of Flame Characteristics and Class ‘O’ for Fire Propagation, are dust and fiber-free, and user friendly.

     

    View Product Datasheet

    QR 8.00QR 24.00
    View Options
  • Fire Alarm

    Flashing Strobe

    Brand: Simplex

    TrueAlert ES addressable strobes are individually addressed visible notification appliances that receive power, supervision, and control signals from the Simplex fire alarm control panel providing IDNAC  Signaling Line Circuits (SLCs).

     

    View Product Datasheet

    QR 141.60
    View Options
  • Beam Detector Controller

    The Fireray 5000 System is an auto-aligning, self-correcting infrared-reflective beam smoke detector.

     

    View Product Datasheet

    QR 420.00
    View Options
  • Extention Split Pipe Clamp

    Brand: B-Line Cooper

    Material: Malleable Iron
    Function: Designed for suspending non-insulated pipe horizontally or vertically.
    Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
    Standard Finish: Plain or Electro-Galvanized.

     

    View Product  Datasheet

    View Options
  • Rubber Lined Split Clamp

    Brand: B-Line Cooper

    Standard finish: Electro-zinc plated complies with ASTM B633
    Function: Designed for suppressing vibration and sound

     

    View Product  Datasheet

    View Options

Main Menu

💬 Need help?