-
Gasketed Brass Plug
Series CO-260 epoxy coated cast iron floor cleanout with 8 in. (203mm) round adjustable gasketed heavy-duty ductile iron top, removable gas tight gasketed brass cleanout plug, and no hub (standard) outlet.
View Product Datasheet
QR 585.00View Options -
Mounting Feet
To fasten the fan on the floor or to the ceiling. Manufactured in steel sheet and protected against atmospheric agents by epoxy paint.
View Product Datasheet
View Options -
Float Valve
Float Control Valve is designed to maintain a constant liquid level in a tank or reservoir. It throttles open on a lowering liquid level and throttles closed upon a rising liquid level.
View Product Datasheet
View Options -
Centrifugal Fans – Forw...
The fans of the AL series find their principal application in the civil and industrial ventilation plants, heating and conditioning.
View Product Datasheet
QR 5,260.00View Options -
Centrifugal In-Line Fans Roun...
The AXC LINE-METAL is a series of centrifugal in-line fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller
View Product Datasheet
QR 588.00 – QR 646.00View Options -
Plate Mounted Axial Fans
The QCM series are axial fans suitable for application on wall or panel in residential, commercial and industrial building.
View Product Datasheet
View Options -
Gravity Shutters
Gravity Shutters avoids heat loss and entry of wind, rain, and birds. The fins of the shutter are opened by the airflow when the fan is working and they close down by gravity when the fan is switched off.
View Product Datasheet
QR 302.00 – QR 485.00View Options -
-
Bronze Y Strainers
Y STRAINERS BSP BRONZE PN20 E777S
Wye-Pattern Lead-Free* Bronze Strainers are designed to protect system components from dirt, rust, and other damaging debris in the piping system.
View Product Datasheet
QR 78.00 – QR 145.00View Options -
Cast Iron Wafer Check Valves
CHECK VALVES, DOUBLE DOOR, SS304 DISC WITH EPDM RUBBER, WAFER, CI BODY, PN16
Series ICV-125-2-2-T Cast Iron Wafer Check Valves are used in commercial and industrial HVAC applications to prevent water hammers and reverse fluid flow in water lines. They feature a cast iron body with aluminum-bronze disc plates, an EPDM seat, PTFE bearings, stainless steel hinge and stop pins, steel plug and eye bolt, and stainless steel springs. Maximum Pressure: 200psi (13.8 bar) CWP (non-shock).
View Product Datasheet
QR 390.00View Options -
NRS Bronze Gate Valves -WATTS
Series B-3000 Class 125 Bronze Gate Valves are used in commercial applications. Watts Series B-3000 Class 125 Bronze Gate valves comply with MSS-SP-80 Type 1 and feature a threaded bonnet, non-rising stem and solid wedge disc.
View Product Datasheet
QR 185.00View Options -
Centrifugal Inline Fans
The TMF is a series of centrifugal in-line fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller. The low noise level and the good pressure head make them ideal for industrial and residential installations. They are suitable to convey clean air up to a maximum temperature of 40°C.
View Product Datasheet
QR 490.00View Options -
Non-Rising Stem Gate Valves
Watts Series F-502 Class 125 Cast Iron Gate Valves comply with MSS-SP-70 Type 1 and feature a non-rising stem, bolted bonnet with open/close indicator, bronze mounting and solid wedge disc.
View Product Datasheet
QR 3,265.00View Options -
Balancing Valves Variable Ori...
Series 9505 is used for static balancing and troubleshooting in cooling and heating systems.
BALANCING VALVES, VARIABLE ORIFICE, BRONZE, TH BSPT, PN20
View Product Datasheet
QR 122.00 – QR 160.00View Options -
Backflow Preventers
Series LF709 Double Check Valve Assemblies are designed to prevent the reverse flow of polluted water from entering into the potable water system. This series can be applied, where approved by the local authority having jurisdiction, on non-health hazard installations. Series LF709 features a modular check design concept to facilitate easy maintenance. Check with local jurisdictional authority as to installation requirements. The LF709 features Lead-Free* construction to comply with Lead-Free* installation requirements.
View Product Datasheet
QR 3,057.00 – QR 5,560.00View Options -
Water Hammer Arrestor-Watts
Watts Drainage Products SS Series Stainless Steel Shock Arrestors are pre-charged and all stainless steel with stainless steel bellows and male IPS threaded connection.
View Product Datasheet
QR 265.00View Options -
Pressure Reducing Valves
This lead-free cartridge-style water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing components and reduce the water consumption for commercial, industrial, and residential applications.
View Product Datasheet
QR 428.00View Options -
Ball Valves
BALL VALVE, BRONZE, C/W HANDWHEEL, PN40, MODEL: EFBV
Full Port, Brass Ball Valves are used in residential and commercial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, chrome-plated brass ball, brass adapter, and steel handle. Seats, thrust washer, and adjustable stem packing seal are virgin PTFE.
View Product Datasheet
QR 36.00 – QR 88.00View Options -
Centrifugal Roof Extractors
Centrifugal roof fans are designed for direct or ducted ventilation in residential, commercial, and industrial buildings. they are designed for easy installation, high-efficiency low noise levels. The motor is outside the airflow, this allows the fan to exhaust clean or slightly dusty air with temperature
View Product Datasheet
View Options -
Inlet Cone
It allows a higher fan efficiency in case of installation with an inlet or outlet not ducted. Manufactured in steel sheet, with one flange according to UNI ISO6580 – EUROVENT to be fitted to the CC fan, and an aerodynamically shaped bell mouth, with fixing holes for a protection guard Protected against atmospheric agents by epoxy paint.
View Product Datasheet
QR 1,365.00View Options -
Double Check Valve Assemblies
Series LF007 Lead-Free* Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Their compact design makes them easy to install in tight spaces
View Product Datasheet
View Options -
Water Hammer Arrestor-Watts L...
The Watts Series LF15M2 and LF15M2S incorporates a precharged, permanent sealed air chamber to absorb the shock. The sealed chamber prevents the loss of air to the water and assures long and trouble-free life.
View Product Datasheet
QR 155.00View Options -
Double Regulating Valves
Variable Orifice Valve Double Regulating PN16
Variable orifice cast iron double regulating valve Diameter from DN050 – 2″ to DN300 – 12″. landed PN16 according to EN1092-2 (ex DIN2533) Lengths according to EN558-1 series 1 (ex DIN3202 F1). Alkyd/acrylic single layer water paint coating (50-100μm) Tolerance on nominal Kv for completely open valve ±5%. With plugged threaded drains (¼” ISO 7/1Rp) for test points. Provided with test points (given unmounted)
View Product Datasheet
QR 733.00 – QR 2,720.00View Options -
Floor Drains – Fixed Sq...
8″ X 8″ FIXED DI GRATE, MODEL: FD-330-Y-4
Series FD-330-Y epoxy coated cast iron drain with anchor flange, weep holes, 8 x 8 in (203 x 203 mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet
Watts engineered drainage products are ideal for applications ranging from specification drains, interceptors, cleanouts, hydrants, and specialty products—for commercial and industrial structures.
View Product Datasheet
QR 208.00View Options