33Products found
View
Filter
  • Water Flow Switch

    Brand: POTTER

    The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.

    • The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
    • It is UL Listed and FM Approved for use on steel pipe.
    • Non – corrosive sleeve factory installed in saddle

    View Product Datasheet

    QR 342.00QR 435.00
    View Options
  • Pressure Switch

    Brand: POTTER

    The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.

     

    View Product Datasheet

    View Options
  • OS and Y Gate Valves

    Brand: Mueller

    Mueller 2300 Series Resilient Wedge Gate Valves are intended for use in potable water distribution or fire protection systems.

    • UL 262 Listed and FM 1120/1130 Approved and certified to ANSI/NSF 61 & 372
    • Epoxy Coated interior and exterior surfaces
    • Outside Screw & Yoke (O.S.&Y)
    • Adjustable packing
    • Rubber encapsulated iron wedge
    • Hand wheel – open left or open right

     

    View Product Datasheet

    View Options
  • CO2 Fire Extinguisher

    Brand: SRI
    • British Standards Institution – BSI approval.
    • Suitable for Class B & Electrical Hazards.
    • High quality and good value.
    • Colour coded for instant recognition.
    • Available in aluminum and lightweight steel.
    • Easy to use and leaves no messy residue.
    • ISO 9001 Certified Quality System by QAS Australia.
    • EN3 approved
    • Cylinder Test Pressure: 250 Bar

    QCD Approved

    Datasheet

    View Options
  • Nozzle Diffuser

    Brand: SRI

    Standard Type Nozzle Diffuser. Made in Aluminum Alloy

     

    View product Datasheet

    View Options
  • Rubber Insulation For Duct – ...

    Brand: Armaflex

    ARMAFLEX CLASS O (AC) RUBBER INSULATION

    Insulation/protection to control condensation, reduce energy loss and protect against frost for air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for air HVAC Ducts and is available in various thicknesses & options with and without factory-applied self-adhesive property.

     

    View Product Datasheet

    View Options
  • Rubber Insulation for Pipe – ...

    Brand: Armaflex

    ARMAFLEX RUBBER INSULATION CLASS O (AC)

    Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning, and refrigerated pipework

    Note : Standard 2 meter length unit Qty , Price is per Mtr

    View Product Datasheet

    View Options
  • Rubber Insulation for Pipe -AP

    Brand: Armaflex

     ARMAFLEX AP RUBBER INSULATION

    Armaflex AP Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning ductwork, and refrigerated pipework. This grade of Insulation has in build micro ban antimicrobial technology & has better fire properties and complies with ASTM E-84 standard.

     

    Standard Length: 2 Mtr pc Qty ,Price is per Mtr. 

     

    View Product Datasheet

    QR 10.15QR 31.53
    View Options
  • Tamper Switch

    Brand: POTTER

    The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.

    The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types

     

     

    View Product Datasheet     OSYSU      PCVS

    View Options
  • Fire Extinguisher Cabinet

    Brand: SRI

     

    • Epoxy Powder Red Coated Paint Finishing
    • Made Upon in Mild Steel

     

    View Product Datasheet

    QR 636.00
    View Options
  • Standard Air Louvers Model FAL

    KMC Air Louvers are designed for both intake and exhaust air service for commercial & Industrial applications. 

    The fresh air louver is used to supply fresh air to the buildings or Air Handling Units (AHU). 

    Louvers are designed and manufactured for use in external applications. 

    Blades are fixed and at 45deg to protect against ingress of rain water. 

     

    View Product Datasheet

    QR 48.00QR 209.00
    View Options
  • Pressure Independent VAV unit...

    KSQ terminals are AHRI Certified and are tested in accordance with AHRI Standard 880.  

    Optional factory installed electric heaters and integral sound attenuators for ultra-quiet performance are also  available . 

    Note: The unit is supplied as a VAV box only . Controller and actuator to be provided by contractor .

     

     

     

    View Product Datasheet

    View Options
  • Curtain Fire Damper (UL 555 &...

    The fire damper is intended to restrict the passage of flame; it shall consist of UL listed fusible link rated to 165˚F which shall release the curtain blades in the event of fire. The standard installation requires that the damper is positioned so that the closed plane of the blades is within the fire rated masonry/concrete barrier. 

    For non-standard construction & for more details consult our sales team. 

    View Product Datasheet     17S     17 D     38 S    38 D

    QR 148.25QR 424.00
    View Options
  • Combination Fire-Smoke Damper...

    Combination Fire Smoke dampers are designed to prevent the spread of fire and smoke through the ventilation ducts in the HVAC systems. 

     

    All the Combination Fire Smoke dampers are UL certified and QCDD approved. 

     

     View Product Datasheet     MA1     LA1     MS1     MT1

    View Options
  • By-Pass VAV unit (Model: KME)

    By-pass VAV terminals consist of a single primary air damper that shall proportion the total primary air through the terminal to either the ceiling plenum or the space as dictated by the space thermostat demand. These units are available with various casing materials & treatments with factory mounted actuators as required. 

    Note : The unit is supplied as VAV box only. Controller & actuator shall be provided by the contractor.

     

    View Product Datasheet

    View Options
  • Linear Bar Grilles

    KMC Linear Bar Grilles are designed to have combined benefits of architectural beauty with performance versatility. These Grilles are an excellent choice for applications where they are exposed and accessible to heavy traffic

    View Product Datasheet

    QR 51.30QR 210.60
    View Options
  • Single Deflection Grilles (Mo...

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     JMC Grilles and Registers have adjustable louvers and are available in single deflection models. The Single deflection grilles are designed to have one set of blades in the horizontal or vertical orientation. Air pattern is adjustable in one plane only. The Horizontal type provides the control over the deflection of the air pattern on adjustments whereas the vertical type provides the spread control of the air pattern reducing both throw and drop. 

     

    View Product Datasheet

    QR 12.00QR 94.00
    View Options
  • Sand Louvers Model KSTL

    The Sand Trap Louvers Model KSTL are designed for usage in serving as a Pre – Filter element in  dusty conditions. It has a degree of separation of sand and large dust particles, even in cases  of high dust concentrations. The vertically arranged sections and holes for sand drainage ensure the sand trap louver is self- cleaning and maintenance free. The sand trap louver is designed to separate large particles at low air velocities, thus avoiding excessive dust loading on conventional plant filters. It is not intended as a substitute for conventional supply air filtration. 

     

    View Product Datasheet

    View Options
  • grilles

    Egg Crate Grilles (Model: KECG)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     JMC Return / Exhaust Grilles utilize core of cubical grid and mostly used where maximum free area is desired and “see through” is not a concern. These Grilles are typically used in ceiling applications where “see through” sight lines are minimized to directly below the grille. Recommended for general return or exhaust of room air. 

     

    View Product Datasheet

     

    QR 28.00QR 233.00
    View Options
  • Door Grille (Model: XNSA)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC air transfer Grilles or Door grilles are typically used indoors and partitions to allow airflow to a space that is not directly served by a ducted source of supply air or a ducted outlet for return or exhaust air. These Door / Wall Grilles offer the largest free area possible with a complete sight proof or lightproof core. 

     

    View Product Datasheet

    QR 32.00QR 210.00
    View Options
  • Spot Diffuser (Model: SPD)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC Spot diffusers are recommended for use in large spaces such as malls, exhibit hall, etc., Where directional control of conditioned air is of very much importance. The adjustable nozzle models make it possible to adapt the jet discharge angle to suit different operating conditions. 

     

    View Product Datasheet

    View Options
  • Jet Diffuser (Model: KDJ)

    Finish: Powder coated to RAL 9010 as standard. Other finish available as option. 

     

    JMC Jet diffuser is a high capacity diffuser with jet-type airflow specifically designed for spot heating or cooling in high ceiling applications. The elegant design is best suited for an architectural high-end appearance and provides a modern alternative to any traditional diffusers while upholding the trusted performance characteristics. 

     

    View Product Datasheet

    QR 234.00QR 1,496.00
    View Options
  • Duct Access Door (Model: AD*)

    Duct access doors are manufactured in accordance to SMACNA standard using high quality materials to provide access for life safety damper inspection, controls adjusting, and many other applications in HVAC ducts. 

     

    View Product Datasheet

     

    QR 31.03QR 102.85
    View Options
  • KSLAD, KRLAD

    Linear Slot Diffuser (Model:...

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    Linear Slot Diffusers manufactured by KMC have been designed to satisfy architectural concepts that require continuous length applications without compromising air distribution performance. These diffusers utilizes an adjustable vane in each slot to control the direction of air discharge either parallel with or perpendicular to its face surface. The adjustment from the face of the diffuser allows for pattern control in a full 180 degree range for either right or left parallel, intermediate or perpendicular 

     

    View Product Datasheet

    QR 44.80QR 318.56
    View Options

Main Menu

💬 Need help?