-
Cylinder Mounting Bracket
Vertical bracketing of the PCL-160, PCL-300 and PCL-460 is provided by the Model MB-15 bracket kit . Vertical bracketing of the PCL-600 is provided by the Model MB-1 bracket kit . These kits must be ordered separately with each cylinder/valve assembly. Cylinder installation instructions are provided in the installation section of this manual.
- Cylinder Bracket
- These kits must be ordered separately with each cylinder/valve assembly
- Cylinder installation instructions are provided in the installation section of this manual.
View Product Datasheet
QR 276.00 – QR 290.00View Options -
Nozzle
Nozzles have been developed for appliance, plenum, and duct applications. All nozzles have a specific flow point value and are supplied with metal blow-off caps to prevent clogging. Each nozzle is stamped with the model number.
View Product Datasheet
QR 148.00 – QR 158.00View Options -
Agent Cylinder With Valve
The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure
- Meets the requirements of the Building Officials and Code Administrators (BOCA)
- Meets the requirements of the International Building Code (IBC)
- Approved by the City of New York Material and Equipment
View Product Datasheet
QR 2,445.00View Options -
Rubber Support Inserts
Used at the supporting points of insulated pipes to prevent crushing of insulation. Available with steel reinforcements for larger sizes. Inherently superior to wood .
View Product Datasheet
QR 1.46 – QR 131.31View Options -
U Strap With EPDM Lining
A Standard Pipe Strap with lining is recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.
View Product Datasheet
QR 1.59 – QR 10.29View Options -
U Strap
A Standard Pipe Strap is recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.
View Product Datasheet
QR 2.40 – QR 9.00View Options -
U Bolts with Lining
U-Bolts with lining are used to secure piping to structural members.
QR 3.22View Options -
U Bolt with 4 nuts
U-Bolts are used to secure piping to structural members.
View Product Datasheet
QR 2.40 – QR 10.55View Options -
Clevis Hanger
A Clevis Hanger provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.
View Product Datasheet
QR 1.63 – QR 20.93View Options -
Sprinkler Pipe Hanger
A Sprinkler Hanger recommended to provide vertical support to non insulated piping systems. By adjusting the position of the sprinkler nut on the hanger rod at the top of the hanger, pipe elevation can be altered.
View Product Datasheet
QR 0.99 – QR 5.71View Options -
Pipe Hanger with EPDM Lining
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.
View Product Datasheet
QR 0.65 – QR 3.28View Options
- POPULAR
BRANDS
-
Refrigeration Copper Coils
Brand: IUSA Cambridge Lee
Copper Pipes & Coils manufactured to ASTM B743 standards are suitable for gas applications and other high-pressure refrigerants.
Buy nowIsoline Pipe Insulation
Brand: K-Flex Isoline
Isoline is a high-quality rubber insulation which is a closed-cell tube insulation product used to prevent condensation on piping applications.
Buy nowWall Split Air Conditioner
Brand: Ruud
Developed with environment friendly R410A refrigerant. R410A refrigerant is highly efficient and has an Ozone Depletion Potential (ODP) of 0.
Buy now
-