25Products found
View
Filter
  • OS and Y Gate Valves

    Brand: Mueller

    Mueller 2300 Series Resilient Wedge Gate Valves are intended for use in potable water distribution or fire protection systems.

    • UL 262 Listed and FM 1120/1130 Approved and certified to ANSI/NSF 61 & 372
    • Epoxy Coated interior and exterior surfaces
    • Outside Screw & Yoke (O.S.&Y)
    • Adjustable packing
    • Rubber encapsulated iron wedge
    • Hand wheel – open left or open right

     

    View Product Datasheet

    View Options
  • Pressure Reducing Valve

    Brand: CLA-VAL

    Cla-Val 90-21 Pressure Reducing Valves are indispensable in any fire protection system.

    • Globe or Angle Pattern
    • Proven Reliable Design
    • Available in Cast Bronze, Ductile Iron and Cast Steel
    • Accurate Pressure Control
    • In Line Service
    • Grooved Ends

    View Product Datasheet

    View Options
  • Wall Split Air Conditioner

    Brand: Ruud

    Developed with environment friendly R410A refrigerant. R410A refrigerant is highly efficient and has an Ozone Depletion Potential (ODP) of 0.
    Super Quiet: The in-built additional temperature sensor in the remote controller monitors the surrounding temperature. Therefore, the air-conditioner can adjust the room temperature more accurately and provide extra comfort to users.

    Quality rating : 6 star

    • Inner-grooved copper tube
    • Safety Design
    • Leakage Detection
    • Sleep Mode
    • Vector Precision Air Supply
    • T3 Tropical Compressor T3 Tropical Rotary compressor for high-efficiency and operation up to 52°C
      Rust-proof
    • Flanging Processed Plate Metal
    • Valve Protection Cover

    Introduction Download Brochure       

    Performance table & selection Download Brochure

    View Options
  • Ducted Split Air Conditioner

    Brand: Ruud

    Low height air handler with side-discharge condensing unit Anti-freeze temperature sensor is provided on the coil against freezing during abnormal operating conditions.

    Microprocessor Based Controller Filter drier is supplied loose as standard accessory Removable panels at the bottom of the unit that are provided for service access .

    Quick connector for interconnecting communication cable (10 meter Long) from main controller to Controller User Interface Metallic Condenser fan blades and evaporator blower ensure safety & high durability .

    High Pressure and Low Pressure safety controls are a standard feature on all the models

    2T,2.5T,3T,3.5T Download Brochure     

          4T,5T  Download Brochure

     

    QR 3,750.00QR 7,650.00
    View Options
  • Cast Iron Y Strainers

    Brand: Flowcon IVC

    FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.

     

    View Product Datasheet   

    Ductile Iron  N16231     

    Grey Cast Iron C16210  

    View Options
  • FIVC Expansion Joint -Threaded

    Brand: Flowcon IVC

    FIVC Expansion Joint is designed to be installed into pipelines for the purpose to avoid damage caused by stretching, compressing, deflecting, or displacing pipes.

     

    View Product Datasheet     EPDM02   

    QR 43.00
    View Options
  • FIVC Butterfly Valve – ...

    Brand: Flowcon IVC

    FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.

    View Product Datasheet

     

    View Options
  • FIVC Butterfly Valve – ...

    Brand: Flowcon IVC

    FIVC Lugged Butterfly Valve with its replaceable seat is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.

    View Product Datasheet

    View Options
  • Flowcon Bronze Y Strainers

    Brand: Flowcon IVC

    FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.

     

    View Product Datasheet    260121  

    View Options
  • Rubber Insulation For Duct – ...

    Brand: Armaflex

    ARMAFLEX CLASS O (AC) RUBBER INSULATION

    Insulation/protection to control condensation, reduce energy loss and protect against frost for air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for air HVAC Ducts and is available in various thicknesses & options with and without factory-applied self-adhesive property.

     

    View Product Datasheet

    QR 365.00
    View Options
  • Rubber Insulation for Pipe -AP

    Brand: Armaflex

     ARMAFLEX AP RUBBER INSULATION

    Armaflex AP Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning ductwork, and refrigerated pipework. This grade of Insulation has in build micro ban antimicrobial technology & has better fire properties and complies with ASTM E-84 standard.

     

    Standard Length: 2 Mtr pc Qty ,Price is per Mtr. 

     

    View Product Datasheet

    QR 10.15QR 31.53
    View Options
  • Rubber Insulation for Pipe – ...

    Brand: Armaflex

    ARMAFLEX RUBBER INSULATION CLASS O (AC)

    Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning, and refrigerated pipework

    Note : Standard 2 meter length unit Qty , Price is per Mtr

    View Product Datasheet

    QR 5.40QR 18.00
    View Options
  • Upright Sprinkler

    Brand: Tyco

    The TYCO Series TY-B, 5.6 K-factor, Upright (TY315) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.

    • All hazard
    • Discharges a hemispherical water spray pattern in the area beneath the sprinkler
    • Small frame, narrow profile bulb
    • Designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, chemical plants, etc.

     

    View Product Datasheet

    QR 24.40
    View Options
  • Sidewall Sprinkler

    Brand: Tyco

    The TYCO Series TY 5.6 K-factor, Horizontal Sidewall Sprinklers are standard response, standard coverage decorative 5 mm glass bulb type spray sprinklers designed for use in light and ordinary hazard, commercial occupancies such as banks, hotels, and shopping malls.

    • Light hazard/Ordinary hazard
    • Small frame
    • Unique deflector design of the horizontal sidewall sprinkler results in smaller profile
    • Designed for installation along a wall or the side of a beam just beneath a smooth ceiling
    • Water discharge is directed primarily outward and downward in a quarter spherical pattern
    • Sidewall sprinklers are often used in lieu of standard pendent or upright sprinklers due to building construction, economic considerations, or aesthetics
    • Special deflector on the vertical sidewall sprinkler allows it to be installed in either a pendent or upright position

     

    View Product Datasheet    

    QR 29.00
    View Options
  • cylinder mounting bracket

    Cylinder Mounting Bracket

    Brand: PYROCHEM

    Vertical bracketing of the PCL-160, PCL-300 and PCL-460 is provided by the Model MB-15 bracket kit . Vertical bracketing of the PCL-600 is provided by the Model MB-1 bracket kit . These kits must be ordered separately with each cylinder/valve assembly. Cylinder installation instructions are provided in the installation section of this manual.

    • Cylinder Bracket
    • These kits must be ordered separately with each cylinder/valve assembly
    • Cylinder installation instructions are provided in the installation section of this manual.

    View Product Datasheet

    QR 262.00QR 275.00
    View Options
  • Pyrochem Nozzle

    Nozzle

    Brand: PYROCHEM

    Nozzles have been developed for appliance, plenum, and duct applications. All nozzles have a specific flow point value and are supplied with metal blow-off caps to prevent clogging. Each nozzle is stamped with the model number.

    View Product Datasheet

    QR 145.00QR 154.00
    View Options
  • Agent Cylinder With Valve

    Agent Cylinder With Valve

    Brand: PYROCHEM

    The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure

    • Meets the requirements of the Building Officials and Code Administrators (BOCA)
    • Meets the requirements of the International Building Code (IBC)
    • Approved by the City of New York Material and Equipment

     

    View Product Datasheet

    View Options
  • Balancing Valves Variable Ori...

    Brand: Flowcon IVC

    FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice.

     

    View Product Datasheet

    QR 630.00
    View Options
  • Concealed Pendent Sprinkler

    Brand: Tyco

    The TYCO Series RFII 5.6 K-factor, “Royal Flush II” Concealed Pendent Standard Response (5-mm bulb), is a decorative sprinkler featuring a flat cover plate designed to conceal the sprinkler. These sprinklers are optimal for architecturally sensitive areas such as hotel lobbies, office buildings, churches, and restaurants.

    Each sprinkler includes a Cover Plate/Retainer Assembly and a Sprinkler/Support Cup Assembly.

     

    View Product Datasheet

    QR 32.00QR 48.00
    View Options
  • Pendent Sprinkler

    Brand: Tyco

    The TYCO Series TY-B, 5.6 K-factor, Pendent (TY325) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.

     

    View Product Datasheet       TY3251

    QR 23.00QR 30.00
    View Options
  • Static Balancing Valve

    Brand: Flowcon IVC

    FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice. The valve offers an accuracy of ± 5 pct. on all settings, for precise flow regulation

     

    View Product Datasheet

     

     

    View Options
  • Bronze Check Valves

    Brand: Flowcon IVC

    FIVC Swing Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.

     

    View Product Datasheet     Bronnze   

    QR 33.00QR 71.00
    View Options
  • Dual Plate Check Valve

    Brand: Flowcon IVC

    FIVC Dual Plate Wafer Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.

     

    View Product Datasheet

    View Options
  • High Flow Insert

    Brand: Flowcon IVC

    The High Flow PICV Insert enables flow rates up to 0.5 l/s in the DN15 and DN20 valves and flow rates up to 0.736 l/s in the DN25 valve, which is beneficial for installations with space limitations. Check out the data sheet on our product page for all details.

    View Product Datasheet

    View Options

Main Menu

💬 Need help?