-
Gasketed Brass Plug
Series CO-260 epoxy coated cast iron floor cleanout with 8 in. (203mm) round adjustable gasketed heavy-duty ductile iron top, removable gas tight gasketed brass cleanout plug, and no hub (standard) outlet.
View Product Datasheet
QR 585.00View Options -
Mounting Feet
To fasten the fan on the floor or to the ceiling. Manufactured in steel sheet and protected against atmospheric agents by epoxy paint.
View Product Datasheet
-
Float Valve
Float Control Valve is designed to maintain a constant liquid level in a tank or reservoir. It throttles open on a lowering liquid level and throttles closed upon a rising liquid level.
View Product Datasheet
-
Centrifugal In-Line Fans Roun...
The AXC LINE-METAL is a series of centrifugal in-line fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller
View Product Datasheet
QR 588.00View Options -
Gravity Shutters
Gravity Shutters avoids heat loss and entry of wind, rain, and birds. The fins of the shutter are opened by the airflow when the fan is working and they close down by gravity when the fan is switched off.
View Product Datasheet
QR 485.00View Options -
-
Bronze Y Strainers
Y STRAINERS BSP BRONZE PN20 E777S
Wye-Pattern Lead-Free* Bronze Strainers are designed to protect system components from dirt, rust, and other damaging debris in the piping system.
View Product Datasheet
QR 78.00 – QR 145.00View Options -
Cast Iron Wafer Check Valves
CHECK VALVES, DOUBLE DOOR, SS304 DISC WITH EPDM RUBBER, WAFER, CI BODY, PN16
Series ICV-125-2-2-T Cast Iron Wafer Check Valves are used in commercial and industrial HVAC applications to prevent water hammers and reverse fluid flow in water lines. They feature a cast iron body with aluminum-bronze disc plates, an EPDM seat, PTFE bearings, stainless steel hinge and stop pins, steel plug and eye bolt, and stainless steel springs. Maximum Pressure: 200psi (13.8 bar) CWP (non-shock).
View Product Datasheet
QR 390.00View Options -
NRS Bronze Gate Valves -WATTS
Series B-3000 Class 125 Bronze Gate Valves are used in commercial applications. Watts Series B-3000 Class 125 Bronze Gate valves comply with MSS-SP-80 Type 1 and feature a threaded bonnet, non-rising stem and solid wedge disc.
View Product Datasheet
QR 185.00View Options -
Centrifugal Inline Fans
The TMF is a series of centrifugal in-line fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller. The low noise level and the good pressure head make them ideal for industrial and residential installations. They are suitable to convey clean air up to a maximum temperature of 40°C.
View Product Datasheet
-
Non-Rising Stem Gate Valves
Watts Series F-502 Class 125 Cast Iron Gate Valves comply with MSS-SP-70 Type 1 and feature a non-rising stem, bolted bonnet with open/close indicator, bronze mounting and solid wedge disc.
View Product Datasheet
-
Pressure Reducing Valves
This lead-free cartridge-style water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing components and reduce the water consumption for commercial, industrial, and residential applications.
View Product Datasheet
QR 428.00View Options -
Ball Valves
BALL VALVE, BRONZE, C/W HANDWHEEL, PN40, MODEL: EFBV
Full Port, Brass Ball Valves are used in residential and commercial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, chrome-plated brass ball, brass adapter, and steel handle. Seats, thrust washer, and adjustable stem packing seal are virgin PTFE.
View Product Datasheet
QR 36.00 – QR 88.00View Options -
Centrifugal Roof Extractors
Centrifugal roof fans are designed for direct or ducted ventilation in residential, commercial, and industrial buildings. they are designed for easy installation, high-efficiency low noise levels. The motor is outside the airflow, this allows the fan to exhaust clean or slightly dusty air with temperature
View Product Datasheet
-
Inlet Cone
It allows a higher fan efficiency in case of installation with an inlet or outlet not ducted. Manufactured in steel sheet, with one flange according to UNI ISO6580 – EUROVENT to be fitted to the CC fan, and an aerodynamically shaped bell mouth, with fixing holes for a protection guard Protected against atmospheric agents by epoxy paint.
View Product Datasheet
QR 1,365.00View Options -
Water Hammer Arrestor-Watts L...
The Watts Series LF15M2 and LF15M2S incorporates a precharged, permanent sealed air chamber to absorb the shock. The sealed chamber prevents the loss of air to the water and assures long and trouble-free life.
View Product Datasheet
QR 155.00View Options -
Double Regulating Valves
Variable Orifice Valve Double Regulating PN16
Variable orifice cast iron double regulating valve Diameter from DN050 – 2″ to DN300 – 12″. landed PN16 according to EN1092-2 (ex DIN2533) Lengths according to EN558-1 series 1 (ex DIN3202 F1). Alkyd/acrylic single layer water paint coating (50-100μm) Tolerance on nominal Kv for completely open valve ±5%. With plugged threaded drains (¼” ISO 7/1Rp) for test points. Provided with test points (given unmounted)
View Product Datasheet
QR 733.00 – QR 2,720.00View Options -
Floor Drains – Fixed Sq...
8″ X 8″ FIXED DI GRATE, MODEL: FD-330-Y-4
Series FD-330-Y epoxy coated cast iron drain with anchor flange, weep holes, 8 x 8 in (203 x 203 mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet
Watts engineered drainage products are ideal for applications ranging from specification drains, interceptors, cleanouts, hydrants, and specialty products—for commercial and industrial structures.
View Product Datasheet
QR 208.00View Options -
Balcony Drains – Bottom...
THREADED BALCONY DRAIN WITH NB DOME
Series RD-240 epoxy coated cast iron bottom outlet balcony drain with flashing clamp, cast nickel bronze dome strainer, and IPS threaded outlet.
View Product Datasheet
QR 345.00View Options -
Full Flow Bronze Gate Valves ...
GATE VALVE, BRONZE, C/W HANDWHEEL, BSP, BS5154, PN20, NRS
The Watts W-WB131 Full-flow Bronze Gate Valve is designed to cut off or connect water, noncorrosive liquid in the pipeline. It’s generally used in building services, water treatment.
View Product Datasheet
QR 92.00View Options -
Manual Balancing Valves Ducti...
Balancing valves, DI body Flanged PN16
The Series W-STBV Static Balancing Valve is designed for flow balancing in cooling, heating, or process water systems. Its measuring points enable convenient system troubleshooting.
View Product Datasheet
QR 746.00View Options -
Cast Iron Swing Check Valves
CHECK VALVES, SWING TYPE, CI BODY, BRZ SEATS, FLANGED PN16
Watts Series F-511 Class 125 Cast Iron Check Valves comply with MSS-SP-71 and feature a bolted cover, bronze mounting, and swing type disc. Series F-511 Class 125 Iron Check Valves are used in commercial applications.
View Product Datasheet
QR 656.00 – QR 1,976.00View Options -
Cast Iron Y Strainers
E77F / 77F-DI-FDA-125
Applicable for liquid and steam service to protect check valves, backflow preventers, and similar controls from foreign matter. FDA approved epoxy coating inside and outside and is suitable for potable water and food contact applications.
View Product Datasheet
QR 987.00 – QR 1,110.00View Options -
Non Return Valves
The non-return valves with the ball, flanged 418/408 consist of a self-cleaning ball lifted by the fluid and guided to a lateral seat, completely out of the way. This system provides a full bore, even with loaded fluids, without any risk of blockage. It provides optimum protection for the pump at the discharge station against the backflow of wastewater and charged or viscous fluids, sanitation.
View Product Datasheet
QR 435.00View Options