10Products found
View
Filter

  • U Strap

    Brand: B-Line Cooper

    Material: Steel
    Function: Designed for supporting pipe runs from strut supports.
    Approvals: Underwriters Laboratories Listed for B2400-3/4″ thru B2400-8″. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 26 and Manufacturers Standardization Society ANSI/MSS  SP-69 & SP-58, Type 26.
    Finish: Electro-Galvanized.

     

     

    View Product Datasheet

     

     

     

    QR 37.80 – QR 44.80
    Select options
    View Options

  • Pressure Switch

    Brand: POTTER

    The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.

     

    View Product Datasheet

    QR 380.00
    Select options
    View Options

  • Tamper Switch

    Brand: POTTER

    The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.

    The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types

     

     

    View Product Datasheet     OSYSU      PCVS

    QR 333.00
    Select options
    View Options

  • Water Flow Switch

    Brand: POTTER

    The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.

    • The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
    • It is UL Listed and FM Approved for use on steel pipe.
    • Non – corrosive sleeve factory installed in saddle

    View Product Datasheet

    Select options
    View Options

  • Band Hanger

    Brand: B-Line Cooper

    Material: Steel, Pre-Galvanized to G90 specifications
    Function: For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation.

     

    View Product Datasheet

    QR 1.00 – QR 16.65
    Select options
    View Options

  • Extention Split Pipe Clamp

    Brand: B-Line Cooper

    Material: Malleable Iron
    Function: Designed for suspending non-insulated pipe horizontally or vertically.
    Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
    Standard Finish: Plain or Electro-Galvanized.

     

    View Product  Datasheet

    QR 3.85 – QR 26.50
    Select options
    View Options

  • U Bolt with 4 nuts

    Brand: B-Line Cooper

    Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts

    View Product  Datasheet

    QR 9.60 – QR 256.00
    Select options
    View Options

  • Riser Clamp

    Brand: B-Line Cooper

    A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe.

     

    View Product  Datasheet

    QR 14.30 – QR 131.00
    Select options
    View Options

  • Short Insulation Protection S...

    Brand: B-Line Cooper

    Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
    Finish: Pre-Galvanized

     

    View Product  Datasheet

    QR 5.70 – QR 14.50
    Select options
    View Options

  • Cleivis Hanger

    Brand: B-Line Cooper

    A Clevis Hanger  provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibrati

     

    View Product Datasheet

    QR 2.86 – QR 99.50
    Select options
    View Options

Main Menu

💬 Need help?