28Products found
View
Filter

  • Ducted Split Air Conditioner

    Brand: Ruud

    Low height air handler with side-discharge condensing unit Anti-freeze temperature sensor is provided on the coil against freezing during abnormal operating conditions.

    Microprocessor Based Controller Filter drier is supplied loose as standard accessory Removable panels at the bottom of the unit that are provided for service access .

    Quick connector for interconnecting communication cable (10 meter Long) from main controller to Controller User Interface Metallic Condenser fan blades and evaporator blower ensure safety & high durability .

    High Pressure and Low Pressure safety controls are a standard feature on all the models

    2T,2.5T,3T,3.5T Download Brochure     

          4T,5T  Download Brochure

     

    QR 3,750.00 – QR 7,650.00
    Select options
    View Options

  • Wall Split Air Conditioner

    Brand: Ruud

    Developed with environment friendly R410A refrigerant. R410A refrigerant is highly efficient and has an Ozone Depletion Potential (ODP) of 0.
    Super Quiet: The in-built additional temperature sensor in the remote controller monitors the surrounding temperature. Therefore, the air-conditioner can adjust the room temperature more accurately and provide extra comfort to users.

    Quality rating : 6 star

    • Inner-grooved copper tube
    • Safety Design
    • Leakage Detection
    • Sleep Mode
    • Vector Precision Air Supply
    • T3 Tropical Compressor T3 Tropical Rotary compressor for high-efficiency and operation up to 52°C
      Rust-proof
    • Flanging Processed Plate Metal
    • Valve Protection Cover

    Introduction Download Brochure       

    Performance table & selection Download Brochure

    QR 2,375.00
    Select options
    View Options

  • Cast Iron Y Strainers

    Brand: Flowcon IVC

    FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.

     

    View Product Datasheet   

    Ductile Iron  N16231     

    Grey Cast Iron C16210  

    Select options
    View Options

  • FIVC Expansion Joint -Threaded

    Brand: Flowcon IVC

    FIVC Expansion Joint is designed to be installed into pipelines for the purpose to avoid damage caused by stretching, compressing, deflecting, or displacing pipes.

     

    View Product Datasheet     EPDM02   

    QR 43.00
    Select options
    View Options

  • FIVC Butterfly Valve – ...

    Brand: Flowcon IVC

    FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.

    View Product Datasheet

     

    QR 1,012.00 – QR 5,671.00
    Select options
    View Options

  • FIVC Butterfly Valve – ...

    Brand: Flowcon IVC

    FIVC Lugged Butterfly Valve with its replaceable seat is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.

    View Product Datasheet

    Select options
    View Options

  • Actuators for PICV

    Brand: FLOWCON INTL.

     

    Settable control characteristics (linear control or equal percentage control) on modulating versions. Standard with failsafe close function

     

    View Product Datasheet      FN     FH     SM     FT

    QR 185.00 – QR 416.00
    Select options
    View Options

  • Flowcon Bronze Y Strainers

    Brand: Flowcon IVC

    FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.

     

    View Product Datasheet    260121  

    Select options
    View Options

  • Pipe Insulation – FSK Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Faced with FSK – Pipe sections, with a factory-applied reinforced Aluminum foil covering (FSK) incorporating an overlap. Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting.

    Standard length: 1.2 MTR

    View Product Datasheet

    QR 14.00 – QR 195.00
    Select options
    View Options

  • Pipe Insulation – Aluglass Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting. Aluglass facing ensures zero water vapor permeability, puncture resistance, and eliminates the need for external weather protection

     

    View Product Datasheet

    QR 11.50 – QR 125.00
    Select options
    View Options
  • cylinder mounting bracket

    Cylinder Mounting Bracket

    Brand: PYROCHEM

    Vertical bracketing of the PCL-160, PCL-300 and PCL-460 is provided by the Model MB-15 bracket kit . Vertical bracketing of the PCL-600 is provided by the Model MB-1 bracket kit . These kits must be ordered separately with each cylinder/valve assembly. Cylinder installation instructions are provided in the installation section of this manual.

    • Cylinder Bracket
    • These kits must be ordered separately with each cylinder/valve assembly
    • Cylinder installation instructions are provided in the installation section of this manual.

    View Product Datasheet

    QR 262.00 – QR 275.00
    Select options
    View Options
  • Pyrochem Nozzle

    Nozzle

    Brand: PYROCHEM

    Nozzles have been developed for appliance, plenum, and duct applications. All nozzles have a specific flow point value and are supplied with metal blow-off caps to prevent clogging. Each nozzle is stamped with the model number.

    View Product Datasheet

    QR 145.00 – QR 154.00
    Select options
    View Options
  • Agent Cylinder With Valve

    Agent Cylinder With Valve

    Brand: PYROCHEM

    The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure

    • Meets the requirements of the Building Officials and Code Administrators (BOCA)
    • Meets the requirements of the International Building Code (IBC)
    • Approved by the City of New York Material and Equipment

     

    View Product Datasheet

    QR 2,445.00
    Select options
    View Options

  • Balancing Valves Variable Ori...

    Brand: Flowcon IVC

    FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice.

     

    View Product Datasheet

    QR 630.00
    Select options
    View Options

  • Static Balancing Valve

    Brand: Flowcon IVC

    FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice. The valve offers an accuracy of ± 5 pct. on all settings, for precise flow regulation

     

    View Product Datasheet

     

     

    Select options
    View Options

  • Pressure Independent Control ...

    Brand: FLOWCON INTL.

    FLOWCON PRESSURE INDEPENDENT CONTROL VALVE, FIXED FEMALE BY FEMALE THREADED, PRESSURE/TEMPERATURE PLUGS (STANDARD) HIGH FLOW

    The Flowcon PICV is designed as a 3-in-1 solution combining a full stroke modulation control valve, an automatic balancing valve, and a differential pressure control valve

     

    View Product Datasheet

    QR 48.00 – QR 335.00
    Select options
    View Options

  • Bronze Check Valves

    Brand: Flowcon IVC

    FIVC Swing Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.

     

    View Product Datasheet     Bronnze   

    QR 33.00 – QR 71.00
    Select options
    View Options

  • Dual Plate Check Valve

    Brand: Flowcon IVC

    FIVC Dual Plate Wafer Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.

     

    View Product Datasheet

    Select options
    View Options

  • Surge Protector

    Brand: Ditek

    DITEK’s DTK-HW Series of surge protective devices are designed and manufactured to meet the standards of the life safety industry and are widely used to protect fire alarm panels and other dedicated branch circuit loads.

     

    View Product Datasheet

     

    QR 295.00
    Select options
    View Options

  • Bye-Pass Assembly

    Brand: FLOWCON INTL.
    For either system by-pass application, Flowcon recommends a combination of automatic/dynamic balancing and 3-way control with focus on indoor climate and reduced energy consumption

    FLOWCON FCU LINK WITH BYPASS ISOLATION VALVES, IVC STRAINER, AND FLOWCON PICV FIXED FMXFM WITH P/T PLUGS, SS FLEXIBLE CONNECTOR & INSULATION

     

     

    View Product Datasheet     BY-PASS ASSY

    Select options
    View Options

  • High Flow Insert

    Brand: Flowcon IVC

    The High Flow PICV Insert enables flow rates up to 0.5 l/s in the DN15 and DN20 valves and flow rates up to 0.736 l/s in the DN25 valve, which is beneficial for installations with space limitations. Check out the data sheet on our product page for all details.

    View Product Datasheet

    QR 120.00
    Select options
    View Options

  • FIVC Butterfly Valve – ...

    Brand: Flowcon IVC

    FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.

    View Product Datasheet

    QR 235.00 – QR 382.00
    Select options
    View Options

  • Extention Split Pipe Clamp

    Brand: B-Line Cooper

    Material: Malleable Iron
    Function: Designed for suspending non-insulated pipe horizontally or vertically.
    Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
    Standard Finish: Plain or Electro-Galvanized.

     

    View Product  Datasheet

    Select options
    View Options

  • Rubber Lined Split Clamp

    Brand: B-Line Cooper

    Standard finish: Electro-zinc plated complies with ASTM B633
    Function: Designed for suppressing vibration and sound

     

    View Product  Datasheet

    Select options
    View Options

Main Menu

💬 Need help?