18Products found
View
Filter
  • Float Valve

    Brand: Albion

    Float Control Valve is designed to maintain a constant liquid level in a tank or reservoir. It throttles open on a lowering liquid level and throttles closed upon a rising liquid level.

     

    View Product Datasheet

    QR 1,850.00
    View Options
  • Swing Check Valves -WEFLO

    Brand: WEFLO

    Swing Check Valve

    • Complies with AWWA C508 clear waterway design
    • Seating type is the resilient material to bronze seat construction

     

    View Product Datasheet

    QR 465.00QR 2,245.00
    View Options
  • FIVC Expansion Joint-Flanged

    Brand: Flowcon IVC

    FIVC Expansion Joint is designed to be installed into pipelines for the purpose to avoid damage caused by stretching, compressing, deflecting, or displacing pipes.

     

    View Product Datasheet       EPDM01

    QR 234.00
    View Options
  • OS and Y Gate Valves

    Brand: Mueller

    Mueller 2300 Series Resilient Wedge Gate Valves are intended for use in potable water distribution or fire protection systems.

    • UL 262 Listed and FM 1120/1130 Approved and certified to ANSI/NSF 61 & 372
    • Epoxy Coated interior and exterior surfaces
    • Outside Screw & Yoke (O.S.&Y)
    • Adjustable packing
    • Rubber encapsulated iron wedge
    • Hand wheel – open left or open right

     

    View Product Datasheet

    QR 1,235.00QR 1,385.00
    View Options
  • Elbow Malleable Iron

    Brand: SIAM

    Elbow are used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of  90 degree.

     

    View Product Datasheet

    QR 6.80QR 175.00
    View Options
  • Water Flow Switch

    Brand: POTTER

    The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.

    • The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
    • It is UL Listed and FM Approved for use on steel pipe.
    • Non – corrosive sleeve factory installed in saddle

    View Product Datasheet

    View Options
  • Gasketed Brass Plug

    Brand: WATTS

    Series CO-260 epoxy coated cast iron floor cleanout with 8 in. (203mm) round adjustable gasketed heavy-duty ductile iron top, removable gas tight gasketed brass cleanout plug, and no hub (standard) outlet.

     

    View Product Datasheet

    QR 585.00
    View Options
  • Cast Iron Swing Check Valves

    Brand: Flowcon IVC

    FIVC Swing Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.

     

    View Product Datasheet     

    CB04

    QR 437.00QR 2,475.00
    View Options
  • Float Valve

    Brand: WATTS

    Float Control Valve is designed to maintain a constant liquid level in a tank or reservoir. It throttles open on a lowering liquid level and throttles closed upon a rising liquid level.

     

    View Product Datasheet

    View Options
  • Cast Iron Wafer Check Valves

    Brand: WATTS

    CHECK VALVES, DOUBLE DOOR, SS304 DISC WITH EPDM RUBBER, WAFER, CI BODY, PN16

     

    Series ICV-125-2-2-T Cast Iron Wafer Check Valves are used in commercial and industrial HVAC applications to prevent water hammers and reverse fluid flow in water lines. They feature a cast iron body with aluminum-bronze disc plates, an EPDM seat, PTFE bearings, stainless steel hinge and stop pins, steel plug and eye bolt, and stainless steel springs. Maximum Pressure: 200psi (13.8 bar) CWP (non-shock).

     

     

    View Product Datasheet

    QR 390.00
    View Options
  • Backflow Preventers

    Brand: WATTS

    Series LF709 Double Check Valve Assemblies are designed to prevent the reverse flow of polluted water from entering into the potable water system. This series can be applied, where approved by the local authority having jurisdiction, on non-health hazard installations. Series LF709 features a modular check design concept to facilitate easy maintenance. Check with local jurisdictional authority as to installation requirements. The LF709 features Lead-Free* construction to comply with Lead-Free* installation requirements.

     

     

    View Product Datasheet

    QR 3,057.00QR 5,560.00
    View Options
  • Dual Plate Check Valve

    Brand: Flowcon IVC

    FIVC Dual Plate Wafer Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.

     

    View Product Datasheet

    QR 510.00
    View Options
  • Butterfly Valve – Semi-...

    Brand: Flowcon IVC

    FIVC Lugged Butterfly Valve with its replaceable seat is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.

     

    View Product Datasheet 

    QR 210.00QR 305.00
    View Options
  • Cast Iron Y Strainers

    Brand: Flowcon IVC

    Y-Strainer Valves are designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damages to the most sensitive plant components such as pumps, control valves, flow, and heat meters.

     

    View Product Datasheet   

    QR 984.00
    View Options
  • Double Regulating Valves

    Brand: WATTS

    Variable Orifice Valve Double Regulating PN16

    Variable orifice cast iron double regulating valve Diameter from DN050 – 2″ to DN300 – 12″. landed PN16 according to EN1092-2 (ex DIN2533) Lengths according to EN558-1 series 1 (ex DIN3202 F1). Alkyd/acrylic single layer water paint coating (50-100μm) Tolerance on nominal Kv for completely open valve ±5%. With plugged threaded drains (¼” ISO 7/1Rp) for test points. Provided with test points (given unmounted)

     

     

    View Product Datasheet

    QR 733.00QR 2,720.00
    View Options
  • Dielectric Flanged Pipe Fittings

    Brand: WATTS

    LF3100M3 dielectric unions feature an iron pipe thread by a copper solder joint. These fittings are designed to be installed between pipes made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray currents.

     

     

    View Product Datasheet

    QR 586.00QR 2,343.00
    View Options
  • Lug Style Butterfly Valves

    Brand: FLOWCON

    Series BF-03 Full Lug Style Butterfly Valves are used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, a stainless steel shaft, mounting pad for the 10-position lever, gear operator, or actuator.

     

     

    View Product Datasheet

    QR 155.16QR 1,151.13
    View Options
  • FIVC Butterfly Valve – ...

    Brand: Flowcon IVC

    FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.

    View Product Datasheet

    QR 456.00QR 506.00
    View Options

Main Menu

💬 Need help?