126Products found
View
Filter

  • Sidewall Sprinkler

    Brand: Tyco

    The TYCO Series TY 5.6 K-factor, Horizontal Sidewall Sprinklers are standard response, standard coverage decorative 5 mm glass bulb type spray sprinklers designed for use in light and ordinary hazard, commercial occupancies such as banks, hotels, and shopping malls.

    • Light hazard/Ordinary hazard
    • Small frame
    • Unique deflector design of the horizontal sidewall sprinkler results in smaller profile
    • Designed for installation along a wall or the side of a beam just beneath a smooth ceiling
    • Water discharge is directed primarily outward and downward in a quarter spherical pattern
    • Sidewall sprinklers are often used in lieu of standard pendent or upright sprinklers due to building construction, economic considerations, or aesthetics
    • Special deflector on the vertical sidewall sprinkler allows it to be installed in either a pendent or upright position

     

    View Product Datasheet    

    QR 35.00
    Select options
    View Options
  • Placeholder

    Static Balancing Valve

    QR 156.00
    Select options
    View Options

  • Tamper Switch

    Brand: POTTER

    The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.

    The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types

     

     

    View Product Datasheet     OSYSU      PCVS

    QR 333.00
    Select options
    View Options

  • Beam Detector Controller

    Brand: FIRE FIGHTING ENTERPRISES

    The Fireray 5000 System is an auto-aligning, self-correcting infrared-reflective beam smoke detector.

     

    View Product Datasheet

    QR 420.00
    Select options
    View Options

  • Discharge Nozzle Brass

    Brand: Marcon Safety

    FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option

     

    View Product Datasheet

    QR 345.00
    Select options
    View Options

  • Centrifugal Inline Fans

    Brand: DYNAIR

    The TMF is a series of centrifugal in-line fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller. The low noise level and the good pressure head make them ideal for industrial and residential installations. They are suitable to convey clean air up to a maximum temperature of 40°C.

     

    View Product Datasheet

    Select options
    View Options

  • Flowcon Y Strainers

    Brand: Flowcon IVC

    FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.

     

    View Product Datasheet    260121  

    QR 36.52
    Select options
    View Options

  • Short Insulation Protection S...

    Brand: B-Line Cooper

    Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
    Finish: Pre-Galvanized

     

    View Product  Datasheet

    QR 5.70 – QR 14.50
    Select options
    View Options

  • Rubber Support Inserts (RSI)

    Brand: WEICCO

    A convenient and effective means of preventing the crushing of insulation at pipe support points of chilled water, condenser water, and domestic hot/cold water installations. Available for any pipe size and insulation thickness.

     

    View Product Datasheet

    QR 2.29 – QR 247.95
    Select options
    View Options

  • By-Pass VAV unit (Model: KME)

    Brand: JMC (formerly KMC Qatar)

    By-pass VAV terminals consist of a single primary air damper that shall proportion the total primary air through the terminal to either the ceiling plenum or the space as dictated by the space thermostat demand. These units are available with various casing materials & treatments with factory mounted actuators as required. 

    Note : The unit is supplied as VAV box only. Controller & actuator shall be provided by the contractor.

     

    View Product Datasheet

    QR 190.00 – QR 532.00
    Select options
    View Options

  • Duct Access Door (Model: AD*)

    Brand: JMC (formerly KMC Qatar)

    Duct access doors are manufactured in accordance to SMACNA standard using high quality materials to provide access for life safety damper inspection, controls adjusting, and many other applications in HVAC ducts. 

     

    View Product Datasheet

     

    QR 31.03 – QR 102.85
    Select options
    View Options

  • Fire Extinguisher Cabinet

    Brand: SRI

     

    • Epoxy Powder Red Coated Paint Finishing
    • Made Upon in Mild Steel

     

    View Product Datasheet

    QR 607.00
    Select options
    View Options

  • Cast Iron Y Strainers

    Brand: Flowcon IVC

    FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.

     

    View Product Datasheet   

    Ductile Iron  N16231     

    Grey Cast Iron C16210  

    QR 238.00 – QR 1,529.00
    Select options
    View Options

  • Balancing Valves Variable Ori...

    Brand: Flowcon IVC

    FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice.

     

    View Product Datasheet

    Select options
    View Options

  • Water Flow Switch

    Brand: POTTER

    The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.

    • The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
    • It is UL Listed and FM Approved for use on steel pipe.
    • Non – corrosive sleeve factory installed in saddle

    View Product Datasheet

    QR 395.00 – QR 565.00
    Select options
    View Options

  • Extention Split Pipe Clamp

    Brand: B-Line Cooper

    Material: Malleable Iron
    Function: Designed for suspending non-insulated pipe horizontally or vertically.
    Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
    Standard Finish: Plain or Electro-Galvanized.

     

    View Product  Datasheet

    QR 3.85 – QR 26.50
    Select options
    View Options

  • Ducted Split Air Conditioner

    Brand: Ruud

    Low height air handler with side-discharge condensing unit Anti-freeze temperature sensor is provided on the coil against freezing during abnormal operating conditions.

    Microprocessor Based Controller Filter drier is supplied loose as standard accessory Removable panels at the bottom of the unit that are provided for service access .

    Quick connector for interconnecting communication cable (10 meter Long) from main controller to Controller User Interface Metallic Condenser fan blades and evaporator blower ensure safety & high durability .

    High Pressure and Low Pressure safety controls are a standard feature on all the models

    2T,2.5T,3T,3.5T Download Brochure     

          4T,5T  Download Brochure

     

    QR 3,990.00 – QR 8,310.00
    Select options
    View Options

  • Rubber Lined Split Clamps

    Brand: WEICCO

    A Convenient and effective means of preventing crushing of pipe supports of Chilled Water, Condenser water and Domestic hot/cold water installations. Available for any pipe size and insulation thickness,

     

    View Product Datasheet

    QR 1.00 – QR 4.55
    Select options
    View Options

  • Door Grille (Model: XNSA)

    Brand: JMC (formerly KMC Qatar)

    Finish: Powder coated to RAL 9010 as standard. Other finish is available as option. 

     

    KMC air transfer Grilles or Door grilles are typically used indoors and partitions to allow airflow to a space that is not directly served by a ducted source of supply air or a ducted outlet for return or exhaust air. These Door / Wall Grilles offer the largest free area possible with a complete sight proof or lightproof core. 

     

    View Product Datasheet

    QR 32.00 – QR 210.00
    Select options
    View Options
  • Agent Cylinder With Valve

    Agent Cylinder With Valve

    Brand: PYROCHEM

    The cylinder is manufactured, tested, and meets DOT requirements. Cylinders come pre-filled with extinguishing agent and are charged with dry nitrogen to a pressure

    • Meets the requirements of the Building Officials and Code Administrators (BOCA)
    • Meets the requirements of the International Building Code (IBC)
    • Approved by the City of New York Material and Equipment

     

    View Product Datasheet

    QR 2,445.00
    Select options
    View Options

  • Fire Extinguishers

    Brand: SRI

    Fire extinguishers are ideal for use against class A, B & C fires. Highly effective against petrol and volatile liquids which makes them ideal for vehicle protection. A good all-rounder makes dry powder an excellent choice for both industrial and domestic premises.

    • EN3 approved.
    • Suitable for Class A, B, C & electrical hazards.
    • Ideal for industrial, commercial and domestic environment.
    • High quality and good value.
    • Color-coded for instant recognition.
    • All units tested by electronic leak detection.
    • Operated effectively at both high and low temperature

     

    View Product Datasheet     Dry Powder Type        Water Type     

    QR 245.00 – QR 364.00
    Select options
    View Options

  • Butterfly Valve Grooved End

    Brand: TYCO-CENTRAL

    The TYCO Models BFV-300 and BFV300C Grooved End Butterfly Valves are indicating type valves designed for  use in fire protection systems where  a visual indication of open or closed  valve condition is required

    • Designed for use in fire protection systems
    • UL and ULC Listed
    • FM Approved

    View Product Datasheet

    QR 975.00 – QR 1,652.00
    Select options
    View Options

  • Ultra-Slim Wall Axial Fans

    Brand: DYNAIR

    To exhaust air directly to the outside or into a short length ducting (max 3 m length). Suitable for toilets, bathrooms, WC’s, shower-rooms, utility rooms, and kitchens

     

    View Product Datasheet

    QR 176.00 – QR 346.00
    Select options
    View Options

  • Rubber Insulation for Pipe wi...

    Brand: Armaflex

    ARMAFLEX RUBBER INSULATION WITH ALUMINIUM FOIL Class O (AC)

     

    Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning ductwork, and refrigerated pipework. Factory-applied Reinforced Aluminium foil facing is applied on the facing of the insulation which will provide additional mechanical protection.

     

    Note : Standard 2 Mtr length unit Qty ,Price is per Mtr

     

    View Product Datasheet

    Select options
    View Options

Main Menu

💬 Need help?