-
Water Flow Switch
The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.
- The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
- It is UL Listed and FM Approved for use on steel pipe.
- Non – corrosive sleeve factory installed in saddle
View Product Datasheet
View Options -
Pressure Switch
The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
View Product Datasheet
View Options -
OS and Y Gate Valves
Mueller 2300 Series Resilient Wedge Gate Valves are intended for use in potable water distribution or fire protection systems.
- UL 262 Listed and FM 1120/1130 Approved and certified to ANSI/NSF 61 & 372
- Epoxy Coated interior and exterior surfaces
- Outside Screw & Yoke (O.S.&Y)
- Adjustable packing
- Rubber encapsulated iron wedge
- Hand wheel – open left or open right
View Product Datasheet
QR 1,180.00View Options -
CO2 Fire Extinguisher
- British Standards Institution – BSI approval.
- Suitable for Class B & Electrical Hazards.
- High quality and good value.
- Colour coded for instant recognition.
- Available in aluminum and lightweight steel.
- Easy to use and leaves no messy residue.
- ISO 9001 Certified Quality System by QAS Australia.
- EN3 approved
- Cylinder Test Pressure: 250 Bar
QCD Approved
QR 288.00View Options -
XLPE Pipe Insulation
XLPE pipe insulation is specially designed for the HVAC segment and for applications in the Textile and Building industry, for thermal & acoustic insulation. Conforms to Class 1 for Surface Spread of Flame Characteristics and Class ‘O’ for Fire Propagation, are dust and fiber-free, and user friendly.
View Product Catalogue
QR 37.00 – QR 68.00View Options -
ST RUBBER INSULATION TUBES
K-FLEX ST
K-FLEX ST elastomeric tubes provide thermal insulation for pipes in industrial, commercial and civil applications. ST insulating tubes are supplied in 2m lengths in a wide range of sizes.
- General-purpose tubular thermal insulation
- Industrial, commercial and civil applications
1 length- 2 meters
View Product Datasheet
QR 6.00View Options -
Test and Drain Valve
The test and drain valve complies with NFPA13 sprinkler systems. Inspector’s test and drain unit w/on-off unit with brass sight glass. Female NPT inlet and outlet cast brass valve.
View Product Datasheet
QR 595.00View Options -
-
Swing Check Valves -WEFLO
Swing check valves, also known as backflow preventers, are important in many industries because they help fluid move in one direction while stopping it from going backwards. This helps things run smoothly and efficiently. valves feature a swinging disc on a hinge or shaft, determining their shut-off capabilities. - Complies with AWWA C508 clear waterway design
- Seating type is the resilient material to bronze seat construction
View Product Datasheet
QR 402.00View Options -
Tamper Switch
The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.
The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types
QR 210.00View Options -
Swinging Hose Reel
Side plates red epoxy powder finishing Threaded Inlet connection Side plates available in stainless steel
- Side plates red epoxy powder finishing
- Threaded Inlet connection
- Side plates available in stainless steel
View Product Datasheet
QR 585.00View Options -
-
-
Fire Extinguishers
Fire extinguishers are ideal for use against class A, B & C fires. Highly effective against petrol and volatile liquids which makes them ideal for vehicle protection. A good all-rounder makes dry powder an excellent choice for both industrial and domestic premises.
- EN3 approved.
- Suitable for Class A, B, C & electrical hazards.
- Ideal for industrial, commercial and domestic environment.
- High quality and good value.
- Color-coded for instant recognition.
- All units tested by electronic leak detection.
- Operated effectively at both high and low temperature
View Product Datasheet Dry Powder Type Water Type
QR 205.00 – QR 282.00View Options -
Abort Switch
Single-gang size; includes 3 position contact block housing with 1 contact block UL, ULC, CSFM listed.
View Product Datasheet
QR 381.00View Options -
Basic Control Unit Modules
4010 control panel Basic Control Unit with 2 x 40 LCD Operator Interface and (1) Two-loop Isolated IDNet+ Communications Channel, Class A or Class B operation, with support for up to 248 addressable IDNet points
View Product Datasheet
QR 4,500.00 – QR 5,262.00View Options -
Switch Input Module
These remote annunciator graphic control modules complement Simplex 4007ES, 4010ES, 4100ES, and 4100U (and other installed legacy panels) by providing LED/lamp/relay drivers and switch inputs to allow custom graphic displays to be designed for specific facility requirements, such as for smoke control (UUKL) systems.
View Product Datasheet
View Options -
Multi-Candela Strobes
Multi-candela strobe with intensity selectable as: 15, 30, 75, or 110 candela; synchronized flash rate.
- Simplex fire alarm control panels with NACs selected to provide strobe synchronization or SmartSync two-wire control
- Ceiling mount strobes installed using standard single gang electrical boxes.
- Rear of housing does not extend into box
View Product Datasheet
View Options -
Flashing Strobe
TrueAlert ES addressable strobes are individually addressed visible notification appliances that receive power, supervision, and control signals from the Simplex fire alarm control panel providing IDNAC Signaling Line Circuits (SLCs).
View Product Datasheet
QR 141.60View Options -
Extention Split Pipe Clamp
Material: Malleable Iron
Function: Designed for suspending non-insulated pipe horizontally or vertically.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized.View Product Datasheet
View Options -
Rubber Lined Split Clamp
Standard finish: Electro-zinc plated complies with ASTM B633
Function: Designed for suppressing vibration and soundView Product Datasheet
View Options -
U Bolt with 4 nuts
Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts
View Product Datasheet
View Options -
Riser Clamp
A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe.
View Product Datasheet
QR 14.30 – QR 131.00View Options -
Short Insulation Protection S...
Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
Finish: Pre-GalvanizedView Product Datasheet
QR 5.70 – QR 14.50View Options