25Products found
View
Filter
  • Water Flow Switch

    Brand: POTTER

    The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.

    • The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
    • It is UL Listed and FM Approved for use on steel pipe.
    • Non – corrosive sleeve factory installed in saddle

    View Product Datasheet

    View Options
  • Pressure Switch

    Brand: POTTER

    The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.

     

    View Product Datasheet

    View Options
  • XLPE Pipe Insulation

    Brand: K-Flex

    XLPE pipe insulation is specially designed for the HVAC segment and for applications in the Textile and Building industry, for thermal & acoustic insulation. Conforms to Class 1 for Surface Spread of Flame Characteristics and Class ‘O’ for Fire Propagation, are dust and fiber-free, and user friendly.

    View Product Catalogue

    QR 37.00QR 68.00
    View Options
  • ST RUBBER INSULATION TUBES

    Brand: K-Flex

    K-FLEX ST

    K-FLEX ST elastomeric tubes provide thermal insulation for pipes in industrial, commercial and civil applications. ST insulating tubes are supplied in 2m lengths in a wide range of sizes.

    • General-purpose tubular thermal insulation
    • Industrial, commercial and civil applications

    1 length- 2 meters

    View Product Datasheet

    QR 6.00
    View Options
  • Pipe Insulation – FSK Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Faced with FSK – Pipe sectionswith a factory-applied reinforced Aluminum foil covering (FSK) incorporating an overlap. Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting.

    Standard length: 1.2 MTR

    View Product Datasheet

    QR 14.00QR 195.00
    View Options
  • Pipe Insulation – Aluglass Faced

    Brand: KIMMCO-ISOVER

    KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:

     

    Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting. Aluglass facing ensures zero water vapor permeability, puncture resistance, and eliminates the need for external weather protection

     

    View Product Datasheet

    QR 11.50QR 125.00
    View Options
  • Tamper Switch

    Brand: POTTER

    The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.

    The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types

     

     

    View Product Datasheet     OSYSU      PCVS

    QR 210.00
    View Options
  • Rubber Lined Split Clamps

    Brand: WEICCO

    A Convenient and effective means of preventing crushing of pipe supports of Chilled Water, Condenser water and Domestic hot/cold water installations. Available for any pipe size and insulation thickness,

     

    View Product Datasheet

    View Options
  • Roof Exhaust Downblast

    Brand: DYNAIR

    FCS -D (Direct drive) & FCS -B (Belt drive) fans are ideal for general purpose exhaust applications including bathrooms, garages, general kitchen areas, offices, churches, dormitories, factories, large warehouses, and other relatively clean air applications. They feature a weather-resistant, seamless spun aluminum housing which works in conjunction with a patented wheel design and deeply spun inlets to provide smooth quiet airflow through the ventilator. The centrifugal wheels are aluminum, non-overloading, backward inclined, robotically welded, and dynamically balanced

     

    View Product Datasheet

    View Options
  • Plate Mounted Axial Fans

    Brand: DYNAIR

    The QCM series are axial fans suitable for application on wall or panel in residential, commercial and industrial building.

     

    View Product  Datasheet

    QR 2,487.00QR 2,896.00
    View Options
  • Wet Chemical Fire Extinguishers

    Brand: SFFECO

    Wet chemical extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers.

    • All metal valve construction
    • Swivel connection on hose allows nozzle to be oriented for proper use
    • Nozzle grip design with 45° angle for easy “overhead” application
    • Low PH agent discharged as fine mist helps prevent grease splash and re-flash while cooling the appliance
    • Precise extinguishing agent application no dry chemical to clean up
    • Excellent for use on all cooking appliances including solid fuel charbroilers
    • Tested on commercial deep fat fryers to  ul 711 test protocol and safe to use on class c fires
    • Class 2a rated to meet fire code occupancy hazard requirements
    • Bar coded and bi-lingual labels

    View Product Datasheet

    QR 280.00
    View Options
  • Gravity Shutters

    Brand: DYNAIR

    Gravity Shutters avoids heat loss and entry of wind, rain, and birds. The fins of the shutter are opened by the airflow when the fan is working and they close down by gravity when the fan is switched off.

     

    View Product Datasheet

    QR 295.00
    View Options
  • High Performance Duct Axial Fans

    Brand: DYNAIR

    Duct axial fans are particularly indicated in those applications that request absolute conformity to high specifications in terms of pressure and air volume.

     

    View Product Datasheet     TA-HP     TA-HT     CC

    View Options
  • Centrifugal Roof Extractors

    Brand: DYNAIR

    Centrifugal roof fans are designed for direct or ducted ventilation in residential, commercial, and industrial buildings. they are designed for easy installation, high-efficiency low noise levels. The motor is outside the airflow, this allows the fan to exhaust clean or slightly dusty air with temperature

     

    View Product Datasheet

    QR 2,296.00
    View Options
  • Centrifugal In-Line Fans Roun...

    Brand: DYNAIR

    The AXC LINE-METAL is a series of centrifugal in-line fans with the advantage, typical of axial  fans, to convey air along the same axis of the  impeller

     

    View Product Datasheet

    QR 372.00
    View Options
  • Inlet Cone

    Brand: DYNAIR

    It allows a higher fan efficiency in case of installation with an inlet or outlet not ducted. Manufactured in steel sheet, with one flange according to UNI ISO6580 – EUROVENT to be fitted to the CC fan, and an aerodynamically shaped bell mouth, with fixing holes for a protection guard Protected against atmospheric agents by epoxy paint.

     

    View Product Datasheet

    QR 540.00
    View Options
  • SFFECO Fire Extinguisher

    Wet Chemical Fire Extinguishers

    Brand: SFFECO

    Wet Chemical Fire Extinguishers use a film forming base with additional chemicals and micro drop mist nozzle technology. The agent forms a mild foam surface over the hot oil but not a crust or foam mess like most other agents. The extinguishing is through smothering initially and cooling through heat absorption through high volume micro drops and a chemical reaction.

    CLASSES OF FIRE

     

    View Product Datasheet

    QR 280.00
    View Options
  • Clarke filter

    Fuel Filter

    Brand: Clarke

    Primary Filter for pump

     

    View Product Datasheet

    QR 441.00
    View Options
  • Ultra-Slim Wall Axial Fans

    Brand: DYNAIR

    To exhaust air directly to the outside or into a short length ducting (max 3 m length). Suitable for toilets, bathrooms, WC’s, shower-rooms, utility rooms, and kitchens

     

    View Product Datasheet

    QR 95.00QR 194.00
    View Options
  • Extention Split Pipe Clamp

    Brand: B-Line Cooper

    Material: Malleable Iron
    Function: Designed for suspending non-insulated pipe horizontally or vertically.
    Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
    Standard Finish: Plain or Electro-Galvanized.

     

    View Product  Datasheet

    View Options
  • Rubber Lined Split Clamp

    Brand: B-Line Cooper

    Standard finish: Electro-zinc plated complies with ASTM B633
    Function: Designed for suppressing vibration and sound

     

    View Product  Datasheet

    View Options
  • U Bolt with 4 nuts

    Brand: B-Line Cooper

    Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts

    View ProducDatasheet

    View Options
  • Riser Clamp

    Brand: B-Line Cooper

    A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe.

     

    View Product  Datasheet

    QR 14.30QR 131.00
    View Options
  • Short Insulation Protection S...

    Brand: B-Line Cooper

    Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
    Finish: Pre-Galvanized

     

    View ProducDatasheet

    QR 5.70QR 14.50
    View Options

Main Menu

💬 Need help?