-
Test and Drain Valve
The test and drain valve complies with NFPA13 sprinkler systems. Inspector’s test and drain unit w/on-off unit with brass sight glass. Female NPT inlet and outlet cast brass valve.
View Product Datasheet
QR 865.00View Options -
Elbow Malleable Iron
Elbow are used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 90 degree.
View Product Datasheet
QR 6.80 – QR 175.00View Options -
Pressure Independent Control ...
FLOWCON PRESSURE INDEPENDENT CONTROL VALVE, FIXED FEMALE BY FEMALE THREADED, PRESSURE/TEMPERATURE PLUGS (STANDARD) HIGH FLOW
The Flowcon PICV is designed as a 3-in-1 solution combining a full stroke modulation control valve, an automatic balancing valve, and a differential pressure control valve
View Product Datasheet
QR 366.00 – QR 456.00View Options -
Discharge Nozzle Brass
FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option
View Product Datasheet
QR 410.00View Options -
Union Malleable Iron
A union also connects two pipes, but is quite different than a coupling to allow easy connection and disconnection multiple times if needed.
View Product Datasheet
QR 23.00View Options -
Sprinkler Pipe Hangers
Adjustable swivel ring-type steel band hangers suitable for suspension of all types of stationary pipes. Most commonly used for sprinkler system pipelines. Supplied completely with swivel nut.
- Knurled swivel nut facilitates easy installation and vertical adjustment of pipe level post installation.
- Lips are dimpled at bends for models WPCS 48 and above, for added strength.
- Swivel nuts are countersunk to prevent burring or damage to threads.
- Available with EPDM Lining
- Eliminates contact between dissimilar materials
- Provides acoustic attenuation by minimizing transmission of high frequencies from piping to building structure
View Product Datasheet
QR 2.04 – QR 5.35View Options -
Bronze Y Strainers
Y STRAINERS BSP BRONZE PN20 E777S
Wye-Pattern Lead-Free* Bronze Strainers are designed to protect system components from dirt, rust, and other damaging debris in the piping system.
View Product Datasheet
QR 78.00 – QR 145.00View Options -
Water Hammer Arrestor-Watts
Watts Drainage Products SS Series Stainless Steel Shock Arrestors are pre-charged and all stainless steel with stainless steel bellows and male IPS threaded connection.
View Product Datasheet
QR 265.00View Options -
Pressure Reducing Valves
This lead-free cartridge-style water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing components and reduce the water consumption for commercial, industrial, and residential applications.
View Product Datasheet
QR 428.00View Options -
Globe Valve
Model 125S Globe Valve Soft Disc, 200 WOG @ 180 ° Max, 100% Pressure Tested, Threaded Ends, Integral Seat, Rising Stem, Swivel Disc Holder.
View Product Datasheet
QR 66.00 – QR 515.52View Options -
High Flow Insert
The High Flow PICV Insert enables flow rates up to 0.5 l/s in the DN15 and DN20 valves and flow rates up to 0.736 l/s in the DN25 valve, which is beneficial for installations with space limitations. Check out the data sheet on our product page for all details.
View Product Datasheet
QR 380.00View Options -
Water Hammer Arrestor-Watts L...
The Watts Series LF15M2 and LF15M2S incorporates a precharged, permanent sealed air chamber to absorb the shock. The sealed chamber prevents the loss of air to the water and assures long and trouble-free life.
View Product Datasheet
QR 155.00View Options -
Automatic Air Vent
Used in all traditional heating systems (independent, central, radiant panel, etc.) to vent air during the filling phase and the air released into the water during the heating phase
View Product Datasheet
QR 23.00 – QR 32.00View Options