-
Float Valve
Float Control Valve is designed to maintain a constant liquid level in a tank or reservoir. It throttles open on a lowering liquid level and throttles closed upon a rising liquid level.
View Product Datasheet
QR 1,850.00View Options -
FIVC Expansion Joint-Flanged
FIVC Expansion Joint is designed to be installed into pipelines for the purpose to avoid damage caused by stretching, compressing, deflecting, or displacing pipes.
View Product Datasheet EPDM01
QR 234.00View Options -
Test and Drain Valve
The test and drain valve complies with NFPA13 sprinkler systems. Inspector’s test and drain unit w/on-off unit with brass sight glass. Female NPT inlet and outlet cast brass valve.
View Product Datasheet
QR 865.00View Options -
OS and Y Gate Valves
Mueller 2300 Series Resilient Wedge Gate Valves are intended for use in potable water distribution or fire protection systems.
- UL 262 Listed and FM 1120/1130 Approved and certified to ANSI/NSF 61 & 372
- Epoxy Coated interior and exterior surfaces
- Outside Screw & Yoke (O.S.&Y)
- Adjustable packing
- Rubber encapsulated iron wedge
- Hand wheel – open left or open right
View Product Datasheet
QR 1,235.00 – QR 1,385.00View Options -
Elbow Malleable Iron
Elbow are used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 90 degree.
View Product Datasheet
QR 6.80 – QR 175.00View Options -
Water Flow Switch
The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.
- The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
- It is UL Listed and FM Approved for use on steel pipe.
- Non – corrosive sleeve factory installed in saddle
View Product Datasheet
View Options -
Sprinkler Pipe Hangers
Adjustable swivel ring-type steel band hangers suitable for suspension of all types of stationary pipes. Most commonly used for sprinkler system pipelines. Supplied completely with swivel nut.
- Knurled swivel nut facilitates easy installation and vertical adjustment of pipe level post installation.
- Lips are dimpled at bends for models WPCS 48 and above, for added strength.
- Swivel nuts are countersunk to prevent burring or damage to threads.
- Available with EPDM Lining
- Eliminates contact between dissimilar materials
- Provides acoustic attenuation by minimizing transmission of high frequencies from piping to building structure
View Product Datasheet
QR 2.04 – QR 5.35View Options -
Bronze Y Strainers
Y STRAINERS BSP BRONZE PN20 E777S
Wye-Pattern Lead-Free* Bronze Strainers are designed to protect system components from dirt, rust, and other damaging debris in the piping system.
View Product Datasheet
QR 78.00 – QR 145.00View Options -
Backflow Preventers
Series LF709 Double Check Valve Assemblies are designed to prevent the reverse flow of polluted water from entering into the potable water system. This series can be applied, where approved by the local authority having jurisdiction, on non-health hazard installations. Series LF709 features a modular check design concept to facilitate easy maintenance. Check with local jurisdictional authority as to installation requirements. The LF709 features Lead-Free* construction to comply with Lead-Free* installation requirements.
View Product Datasheet
QR 3,057.00 – QR 5,560.00View Options -
Pressure Reducing Valves
This lead-free cartridge-style water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing components and reduce the water consumption for commercial, industrial, and residential applications.
View Product Datasheet
QR 428.00View Options -
Globe Valve
Model 125S Globe Valve Soft Disc, 200 WOG @ 180 ° Max, 100% Pressure Tested, Threaded Ends, Integral Seat, Rising Stem, Swivel Disc Holder.
View Product Datasheet
QR 66.00 – QR 515.52View Options -
Butterfly Valve – Semi-...
FIVC Lugged Butterfly Valve with its replaceable seat is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.
View Product Datasheet
QR 210.00 – QR 305.00View Options -
Cast Iron Y Strainers
Y-Strainer Valves are designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damages to the most sensitive plant components such as pumps, control valves, flow, and heat meters.
View Product Datasheet
QR 984.00View Options -
Dielectric Flanged Pipe Fittings
LF3100M3 dielectric unions feature an iron pipe thread by a copper solder joint. These fittings are designed to be installed between pipes made from dissimilar metals to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray currents.
View Product Datasheet
QR 586.00 – QR 2,343.00View Options -
Lug Style Butterfly Valves
Series BF-03 Full Lug Style Butterfly Valves are used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, a stainless steel shaft, mounting pad for the 10-position lever, gear operator, or actuator.
View Product Datasheet
QR 155.16 – QR 1,151.13View Options -
FIVC Butterfly Valve – ...
FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.
View Product Datasheet
QR 456.00 – QR 506.00View Options