-
Grooved Check Valve
The TYCO Model CV-1F Grooved End Swing Check Valves are compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction.
View Product Datasheet
QR 525.00 – QR 1,245.00View Options -
CO2 Fire Extinguisher
- British Standards Institution – BSI approval.
- Suitable for Class B & Electrical Hazards.
- High quality and good value.
- Colour coded for instant recognition.
- Available in aluminum and lightweight steel.
- Easy to use and leaves no messy residue.
- ISO 9001 Certified Quality System by QAS Australia.
- EN3 approved
- Cylinder Test Pressure: 250 Bar
QCD Approved
QR 288.00View Options -
Wet Alarm Valves
The TYCO Model Alarm Check Valves are intended for use in wet pipe (automatic sprinkler) fire protection systems.
View Product Datasheet
QR 1,213.00 – QR 2,685.00View Options -
-
FIVC Butterfly Valve – ...
FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.
View Product Datasheet
QR 1,012.00 – QR 5,671.00View Options -
FIVC Butterfly Valve – ...
FIVC Lugged Butterfly Valve with its replaceable seat is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.
View Product Datasheet
QR 1,709.00 – QR 5,031.00View Options -
Flowcon Y Strainers
FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.
View Product Datasheet 260121
QR 27.00View Options -
Butterfly Valve Grooved End
The TYCO Models BFV-300 and BFV300C Grooved End Butterfly Valves are indicating type valves designed for use in fire protection systems where a visual indication of open or closed valve condition is required
- Designed for use in fire protection systems
- UL and ULC Listed
- FM Approved
View Product Datasheet
-
Swinging Hose Reel
Side plates red epoxy powder finishing Threaded Inlet connection Side plates available in stainless steel
- Side plates red epoxy powder finishing
- Threaded Inlet connection
- Side plates available in stainless steel
View Product Datasheet
QR 585.00View Options -
Fire Extinguishers
Fire extinguishers are ideal for use against class A, B & C fires. Highly effective against petrol and volatile liquids which makes them ideal for vehicle protection. A good all-rounder makes dry powder an excellent choice for both industrial and domestic premises.
- EN3 approved.
- Suitable for Class A, B, C & electrical hazards.
- Ideal for industrial, commercial and domestic environment.
- High quality and good value.
- Color-coded for instant recognition.
- All units tested by electronic leak detection.
- Operated effectively at both high and low temperature
View Product Datasheet Dry Powder Type Water Type
QR 205.00 – QR 282.00View Options -
Balancing Valves Variable Ori...
FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice.
View Product Datasheet
QR 630.00View Options -
Bladder Expansion Tank
Intended for use in hydronic heating systems, these tanks accept the expanded volume of hot water keeping the system pressure below the relief valve setting, thus preventing dangerous pressure build-up.
View Product Datasheet
QR 12,200.00 – QR 13,500.00View Options -
Roof Exhaust Downblast
FCS -D (Direct drive) & FCS -B (Belt drive) fans are ideal for general purpose exhaust applications including bathrooms, garages, general kitchen areas, offices, churches, dormitories, factories, large warehouses, and other relatively clean air applications. They feature a weather-resistant, seamless spun aluminum housing which works in conjunction with a patented wheel design and deeply spun inlets to provide smooth quiet airflow through the ventilator. The centrifugal wheels are aluminum, non-overloading, backward inclined, robotically welded, and dynamically balanced
View Product Datasheet
-
Plate Mounted Axial Fans
The QCM series are axial fans suitable for application on wall or panel in residential, commercial and industrial building.
View Product Datasheet
QR 2,487.00 – QR 2,896.00View Options -
Trim Vertical Closed Drain Co...
The TYCO Series “Royal Flush II” Concealed Pendent Sprinklers Quick Response (3-mm bulb) and Standard Response (5-mm bulb), are decorative sprinklers featuring a flat cover plate designed to conceal the sprinkler.
The TYCO Model RC-1 Retard Chamber is required in installations that will be subject to pressure variations, as are generally associated with public water supplies, in order to help prevent false alarms.
- Quick & Standard Response, Standard Coverage
- Designed to conceal the sprinkler.
- UL Listed and FM Approval
View Product Datasheet RFII
QR 1,260.00View Options -
Gravity Shutters
Gravity Shutters avoids heat loss and entry of wind, rain, and birds. The fins of the shutter are opened by the airflow when the fan is working and they close down by gravity when the fan is switched off.
View Product Datasheet
QR 295.00View Options -
-
DZR Brass Float Valve
DZR Brass Float Valve. Supplied with locknut. Machined fixed flange on the valve body. No jam single lever action.
View Product Datasheet
QR 151.00View Options -
Static Balancing Valve
FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice. The valve offers an accuracy of ± 5 pct. on all settings, for precise flow regulation
View Product Datasheet
QR 105.00View Options -
Centrifugal In-Line Fans Roun...
The AXC LINE-METAL is a series of centrifugal in-line fans with the advantage, typical of axial fans, to convey air along the same axis of the impeller
View Product Datasheet
QR 372.00View Options -
Centrifugal Roof Extractors
Centrifugal roof fans are designed for direct or ducted ventilation in residential, commercial, and industrial buildings. they are designed for easy installation, high-efficiency low noise levels. The motor is outside the airflow, this allows the fan to exhaust clean or slightly dusty air with temperature
View Product Datasheet