-
Swing Check Valves -WEFLO
Swing Check Valve
- Complies with AWWA C508 clear waterway design
- Seating type is the resilient material to bronze seat construction
View Product Datasheet
QR 465.00 – QR 2,245.00View Options -
Flowcon Y Strainers
FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.
View Product Datasheet 260121
QR 36.52 – QR 104.00View Options -
Elbow Malleable Iron
Elbow are used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 90 degree.
View Product Datasheet
QR 6.80 – QR 175.00View Options -
Water Flow Switch
The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.
- The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
- It is UL Listed and FM Approved for use on steel pipe.
- Non – corrosive sleeve factory installed in saddle
View Product Datasheet
View Options -
Gasketed Brass Plug
Series CO-260 epoxy coated cast iron floor cleanout with 8 in. (203mm) round adjustable gasketed heavy-duty ductile iron top, removable gas tight gasketed brass cleanout plug, and no hub (standard) outlet.
View Product Datasheet
QR 585.00View Options -
Pressure Independent Control ...
FLOWCON PRESSURE INDEPENDENT CONTROL VALVE, FIXED FEMALE BY FEMALE THREADED, PRESSURE/TEMPERATURE PLUGS (STANDARD) HIGH FLOW
The Flowcon PICV is designed as a 3-in-1 solution combining a full stroke modulation control valve, an automatic balancing valve, and a differential pressure control valve
View Product Datasheet
QR 245.00 – QR 475.00View Options -
Cast Iron Swing Check Valves
FIVC Swing Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet
QR 437.00 – QR 2,475.00View Options -
Float Valve
Float Control Valve is designed to maintain a constant liquid level in a tank or reservoir. It throttles open on a lowering liquid level and throttles closed upon a rising liquid level.
View Product Datasheet
View Options -
Cast Iron Wafer Check Valves
CHECK VALVES, DOUBLE DOOR, SS304 DISC WITH EPDM RUBBER, WAFER, CI BODY, PN16
Series ICV-125-2-2-T Cast Iron Wafer Check Valves are used in commercial and industrial HVAC applications to prevent water hammers and reverse fluid flow in water lines. They feature a cast iron body with aluminum-bronze disc plates, an EPDM seat, PTFE bearings, stainless steel hinge and stop pins, steel plug and eye bolt, and stainless steel springs. Maximum Pressure: 200psi (13.8 bar) CWP (non-shock).
View Product Datasheet
QR 390.00View Options -
Ball Valves
BALL VALVE, BRONZE, C/W HANDWHEEL, PN40, MODEL: EFBV
Full Port, Brass Ball Valves are used in residential and commercial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, chrome-plated brass ball, brass adapter, and steel handle. Seats, thrust washer, and adjustable stem packing seal are virgin PTFE.
View Product Datasheet
QR 36.00 – QR 88.00View Options -
Dual Plate Check Valve
FIVC Dual Plate Wafer Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet
QR 510.00View Options -
Bronze Globe Valve Rising Stem
FLOWCON, ME – GLOBE VALVE, MODEL: FLBGL-16, Bronze globe valve, threaded ends.
View Product Datasheet
QR 55.00View Options -
Double Regulating Valves
Variable Orifice Valve Double Regulating PN16
Variable orifice cast iron double regulating valve Diameter from DN050 – 2″ to DN300 – 12″. landed PN16 according to EN1092-2 (ex DIN2533) Lengths according to EN558-1 series 1 (ex DIN3202 F1). Alkyd/acrylic single layer water paint coating (50-100μm) Tolerance on nominal Kv for completely open valve ±5%. With plugged threaded drains (¼” ISO 7/1Rp) for test points. Provided with test points (given unmounted)
View Product Datasheet
QR 733.00 – QR 2,720.00View Options -
Di-Electric Union
Dielectric Unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and features a female iron pipe thread to solder connection.
View Product Datasheet
QR 34.00 – QR 146.00View Options -
Lug Style Butterfly Valves
Series BF-03 Full Lug Style Butterfly Valves are used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, a stainless steel shaft, mounting pad for the 10-position lever, gear operator, or actuator.
View Product Datasheet
QR 155.16 – QR 1,151.13View Options -
FIVC Butterfly Valve – ...
FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.
View Product Datasheet
QR 350.00 – QR 506.00View Options