-
Grooved Check Valve
The TYCO Model CV-1F Grooved End Swing Check Valves are compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction.
View Product Datasheet
QR 525.00 – QR 1,245.00View Options -
Water Flow Switch
The Potter VSR is a vane-type Waterflow switch with a non-corrosive insert for use on wet sprinkler systems.
- The Potter VSR is a vane type water flow switch with non-corrosive insert for use on wet sprinkler systems.
- It is UL Listed and FM Approved for use on steel pipe.
- Non – corrosive sleeve factory installed in saddle
View Product Datasheet
-
Pressure Reducing Valve
Cla-Val 90-21 Pressure Reducing Valves are indispensable in any fire protection system.
- Globe or Angle Pattern
- Proven Reliable Design
- Available in Cast Bronze, Ductile Iron and Cast Steel
- Accurate Pressure Control
- In Line Service
- Grooved Ends
View Product Datasheet
-
Wet Alarm Valves
The TYCO Model Alarm Check Valves are intended for use in wet pipe (automatic sprinkler) fire protection systems.
View Product Datasheet
QR 1,213.00 – QR 2,685.00View Options -
Test and Drain Valve
The test and drain valve complies with NFPA13 sprinkler systems. Inspector’s test and drain unit w/on-off unit with brass sight glass. Female NPT inlet and outlet cast brass valve.
View Product Datasheet
QR 595.00View Options -
Discharge Nozzle Brass
FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option
View Product Datasheet
QR 345.00View Options -
FIVC Expansion Joint -Threaded
FIVC Expansion Joint is designed to be installed into pipelines for the purpose to avoid damage caused by stretching, compressing, deflecting, or displacing pipes.
View Product Datasheet EPDM02
QR 43.00View Options -
Flowcon Bronze Y Strainers
FIVC Y-Strainer is designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damage to the most sensitive plant components such as pumps, control valves, flow, and heat meters.
View Product Datasheet 260121
-
Automatic Air Vent
Automatic Air Vent is designed as a single action valve with a small orifice to release low volumes of air when the line is under pressure.
View Product Datasheet
QR 32.00View Options -
JERSEY ALUGLASS TAPE 3″
Jersey Aluglass self-adhesive tape is a premium quality tape, specifically built for Aluglass Insulation products in the HVAC industry. High-quality products are used for its construction like a thicker gauge of aluminum foil, FR Glue, Glass cloth with a high yarn count backing, solvent-based adhesive & and easy release silicon paper.
View Product Datasheet
QR 8.00View Options -
Deluge Valve, Diaphragm Style
The DV-5 Deluge Valve is a diaphragm style valve that depends upon water pressure in the Diaphragm Chamber to hold the Diaphragm closed against the water supply pressure. These valves are to be used only for hydraulically calculated systems.
View Product Datasheet
QR 3,882.00View Options -
Pressure Independent Control ...
FLOWCON PRESSURE INDEPENDENT CONTROL VALVE, FIXED FEMALE BY FEMALE THREADED, PRESSURE/TEMPERATURE PLUGS (STANDARD) HIGH FLOW
The Flowcon PICV is designed as a 3-in-1 solution combining a full stroke modulation control valve, an automatic balancing valve, and a differential pressure control valve
View Product Datasheet
-
Dual Plate Check Valve
FIVC Dual Plate Wafer Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet
QR 328.00View Options -
Bye-Pass Assembly
For either system by-pass application, Flowcon recommends a combination of automatic/dynamic balancing and 3-way control with focus on indoor climate and reduced energy consumption FLOWCON FCU LINK WITH BYPASS ISOLATION VALVES, IVC STRAINER, AND FLOWCON PICV FIXED FMXFM WITH P/T PLUGS, SS FLEXIBLE CONNECTOR & INSULATION
View Product Datasheet BY-PASS ASSY
-
Lug Style Butterfly Valves
Series BF-03 Full Lug Style Butterfly Valves are used in HVAC, irrigation, OEM, commercial, and institutional applications and wherever positive shutoff is required to control the flow of liquids, gases, and slurries. It features iron body construction, a stainless steel shaft, mounting pad for the 10-position lever, gear operator, or actuator.
View Product Datasheet
QR 167.00View Options -
FIVC Butterfly Valve – ...
FIVC Wafer Butterfly Valve is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.
View Product Datasheet