-
XLPE Pipe Insulation
AEROLAM XLPE as pipe insulation is specially designed for the HVAC segment and for applications in the Textile and Building industry, for thermal & acoustic insulation. AEROLAM XLPE conforms to Class 1 for Surface Spread of Flame Characteristics and Class ‘O’ for Fire Propagation, are dust and fiber-free, and user friendly.
View Product Datasheet
QR 8.35 – QR 21.85View Options -
Band Hanger
Material: Steel, Pre-Galvanized to G90 specifications
Function: For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation.View Product Datasheet
QR 1.00 – QR 16.65View Options -
Extention Split Pipe Clamp
Material: Malleable Iron
Function: Designed for suspending non-insulated pipe horizontally or vertically.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized.View Product Datasheet
QR 3.85 – QR 26.50View Options -
Rubber Lined Split Clamp
Standard finish: Electro-zinc plated complies with ASTM B633
Function: Designed for suppressing vibration and soundView Product Datasheet
QR 1.27 – QR 5.44View Options -
U Bolt with 4 nuts
Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts
View Product Datasheet
QR 9.60 – QR 256.00View Options -
Riser Clamp
A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe.
View Product Datasheet
QR 14.30 – QR 131.00View Options -
Short Insulation Protection S...
Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
Finish: Pre-GalvanizedView Product Datasheet
QR 5.70 – QR 14.50View Options -
Cleivis Hanger
A Clevis Hanger provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibrati
View Product Datasheet
QR 2.86 – QR 99.50View Options -
Universal Base for Fire Detec...
The USB 502 detector base series is used for connecting and mounting the SecuriStar detector family and is completely compatible with the USB 501 detector base series, although this series has a larger connection compartment inside the base. A 6-pin terminal block is present in the interior of the USB 502 for connecting the base to the fire detectors. If necessary, an additional 4-pin terminal block can be fitted in the corresponding snap-in holder to create support points. The detector is fixed in the USB 502 by means of a bayonet connection.
View Product Datasheet
QR 12.11 – QR 82.00View Options -
Hose Nozzle
The adjustable nozzle is used for Class A and B fires in most industrial applications. They are used with a lined fire hose. Adjustable fog, straight stream and shut off.
View Product Datasheet
QR 298.00View Options -
Flashing Strobe
TrueAlert ES addressable strobes are individually addressed visible notification appliances that receive power, supervision, and control signals from the Simplex fire alarm control panel providing IDNAC Signaling Line Circuits (SLCs).
View Product Datasheet
QR 141.60View Options -
Fire Blanket
High quality fire blankets. They are also Tamper evident. Front loading for minimum removal time. Requires 40% less wall space.
View Product Datasheet
QR 98.00View Options -
Pressure Sensor for Liquids
Active sensor (4…20 mA) for pressure measurement in HVAC systems. The sensor is suitable for water and water/glycol mixtures
View Product Datasheet
QR 686.00View Options -
O- Ring
O rings are used to block a path that may otherwise allow a liquid or a gas to escape. The o ring is placed into a groove to secure them in place, and then compressed between two surfaces
View Product Datasheet
QR 224.00View Options -
Submersible Pump
Wastewater and sewage pumps with an in-built macerator system. Enable pumping of fecal matter into small pressure pipes (DN40)
View Product Datasheet
QR 4,765.00View Options -
Centrifugal Roof Extractors
Centrifugal roof fans are designed for direct or ducted ventilation in residential, commercial, and industrial buildings. they are designed for easy installation, high-efficiency low noise levels. The motor is outside the airflow, this allows the fan to exhaust clean or slightly dusty air with temperature
View Product Datasheet
View Options -
Inlet Cone
It allows a higher fan efficiency in case of installation with an inlet or outlet not ducted. Manufactured in steel sheet, with one flange according to UNI ISO6580 – EUROVENT to be fitted to the CC fan, and an aerodynamically shaped bell mouth, with fixing holes for a protection guard Protected against atmospheric agents by epoxy paint.
View Product Datasheet
QR 1,365.00View Options -
Bronze Check Valves
FIVC Swing Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet Bronnze Disc CS0921 Rubber Disc CS1121
QR 42.00 – QR 136.00View Options -
Balancing Valves Fixed Orifice
FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice. The valve offers an accuracy of ± 5 pct. on all settings, for precise flow regulation.
View Product Datasheet
Brass body FSB25GF01
QR 144.00View Options -
Dual Plate Check Valve
FIVC Dual Plate Wafer Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet
QR 510.00View Options -
Swing Check Valve
UL-listed, FM-approved check valve product line now includes all ductile iron construction, bronze to BUNA seating, lifting rings, PN16 drilling, bosses for bypass connections, and a drain plug.
View Product Datasheet
QR 1,890.00View Options -
Double Pole Break Glass Unit
Double pole break glass unit used for emergency door release which can be surface or flush-mounted. A breakable glass element must be replaced after each activation.
View Product Datasheet
QR 94.00View Options -
Recessed Sprinkler Escutcheon...
Recessed sprinkler consists of the sprinkler with escutcheon plate, also known as rosette plate. Comes in white, chrome, or custom color finish. It is UL Listed and FM Approved.
View Product Datasheet
QR 7.75View Options -
Wet Chemical Fire Extinguishers
Ceasefire’s Wet Chemical Based Fire Extinguishers are specially designed to fight oil fires in kitchens. When set against a fire, the specialized foam extinguishing agent in these extinguishers smothers the fire by cutting off the oxygen supply and bringing the surrounding temperature to below combustion levels within seconds. Being a de-greasing substance, the extinguishing agent ensures that the kitchen can be cleaned easily post a fire. Besides the wet chemical foam is over 99% biodegradable, making these extinguishers safe on the environment
View Product Datasheet
QR 326.00View Options
- POPULAR
BRANDS
-
Refrigeration Copper Coils
Brand: IUSA Cambridge Lee
Copper Pipes & Coils manufactured to ASTM B743 standards are suitable for gas applications and other high-pressure refrigerants.
Buy nowIsoline Pipe Insulation
Brand: K-Flex Isoline
Isoline is a high-quality rubber insulation which is a closed-cell tube insulation product used to prevent condensation on piping applications.
Buy nowWall Split Air Conditioner
Brand: Ruud
Developed with environment friendly R410A refrigerant. R410A refrigerant is highly efficient and has an Ozone Depletion Potential (ODP) of 0.
Buy now
-