-
ST RUBBER INSULATION TUBES
K-FLEX ST
K-FLEX ST elastomeric tubes provide thermal insulation for pipes in industrial, commercial and civil applications. ST insulating tubes are supplied in 2m lengths in a wide range of sizes.
- General-purpose tubular thermal insulation
- Industrial, commercial and civil applications
View Product Datasheet
QR 3.10 – QR 10.41View Options -
Refrigeration Copper Coils
Copper Pipes & Coils manufactured to ASTM B743 standards are suitable for gas applications and other high-pressure refrigerants.
ACR Copper Coils & Pipes are dehydrated, degreased, purged with nitrogen, and capped to maintain the internal cleanliness of the product.
Coil Length: 15 meters
View Product Datasheet
QR 100.00 – QR 460.00View Options -
Duct Insulation Slabs –...
KIMMCO Semi-rigid and rigid slabs with Reinforced Aluminium Foil facing (FSK) manufactured from stable glass fibers bonded with thermosetting resins, and free from coarse fibers and shot. Easy to handle and cut to fit rectangular ducts and air handling equipment.
View Product Datasheet
QR 14.00View Options -
Pipe Insulation – FSK Faced
KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:
Faced with FSK – Pipe sections, with a factory-applied reinforced Aluminum foil covering (FSK) incorporating an overlap. Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting.
Standard length: 1.2 MTR
View Product Datasheet
QR 10.46 – QR 242.71View Options -
Refrigerant Pipe Insulation
Isoline (from K-Flex) is a high-quality Class-1 Elastomeric/Rubber Insulation which is a flexible, closed-cell tube insulation product used to conserve energy and prevent condensation on piping applications. The product’s closed-cell structure creates exceptional thermal properties that protect against moisture penetration in refrigeration tubing applications.
Very low thermal conductivity high water vapor diffusion resistance: Closed-cell elastomeric insulation has a high water vapor diffusion resistance factor µ (µ>̲5000) which minimizes water vapor penetration, giving an excellent long-term performance.
Low flame spread: When fire tested, ISOLINE does not generate flaming droplets and has low flame spread achieving the fire performance of Class 1
Fire: Class 1 BS 476 Pt 7 1997
Ozone Depletion: Zero
HCFC-CFC free
Standard length : 6 FEET LONG CLASS “1” PIPE SECTIONS
Purchased as Box Qty
View Product Datasheet
QR 155.00View Options -
Rockwool Slab
Rockwool RB Slabs are semi-rigid and rigid boards manufactured from stable stone fibers bonded with a minimum quantity of thermosetting resin binder
View Product Datasheet
QR 15.85View Options -
Rubber Insulation for Pipe – ...
ARMAFLEX RUBBER INSULATION CLASS O (AC)
Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning, and refrigerated pipework
Note : Standard 2 meter length unit Qty , Price is per Mtr
View Product Datasheet
QR 2.50 – QR 16.22View Options -
Pipe Hanger with EPDM Lining
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.
View Product Datasheet
QR 0.65 – QR 3.28View Options -
Pipe Insulation – Aluglass Faced
KIMMCO-ISOVER’s produces a wide range of glass wool-based pre-formed pipe sections; designed specifically for the insulation of HVAC pipework.:
Performed sections of glass fibers bonded with a heat-resistant resin, free from the shot and coarse fiber, light, damage-resistant, easy to handle, cut, and fit. The sections are split along their lengths to provide a hinge for ease of fitting. Aluglass facing ensures zero water vapor permeability, puncture resistance, and eliminates the need for external weather protection
View Product Datasheet
QR 28.00View Options -
JERSEY ALUGLASS TAPE 3″
Jersey Aluglass self-adhesive tape is a premium quality tape, specifically built for Aluglass Insulation products in the HVAC industry. High-quality products are used for its construction like a thicker gauge of aluminum foil, FR Glue, Glass cloth with a high yarn count backing, solvent-based adhesive & and easy release silicon paper.
View Product Datasheet
QR 8.00View Options -
Refrigerant Pipe Insulation
Worldflex is a high-quality Class-1 Elastomeric/Rubber Insulation which is a flexible, closed-cell tube insulation product used to conserve energy and prevent condensation on piping applications. The product’s closed-cell structure creates exceptional thermal properties that protect against moisture penetration in refrigeration tubing applications.
Low flame spread: When fire tested, World Flex does not generate flaming droplets and has low flame spread achieving the fire performance of Class 1
Fire: Class 1 BS 476 Pt 7 1997
Ozone Depletion: Zero
HCFC-CFC free
Standard length : 6 FEET LONG CLASS “1” PIPE SECTIONS
Purchased as Box Qty
View Product Datasheet
-
Rockwool Slab
KIMMCO Rockwool RB Slabs are semi-rigid and rigid boards manufactured from stable stone fibers bonded with a minimum quantity of thermosetting resin binder
View Product Datasheet
QR 15.50 – QR 42.00View Options -
Recessed Sprinkler Escutcheon...
Recessed sprinkler consists of the sprinkler with escutcheon plate, also known as rosette plate. Comes in white, chrome, or custom color finish. It is UL Listed and FM Approved.
View Product Datasheet
QR 7.75View Options -
Pendent Sprinkler
The TYCO Series TY-B, 5.6 K-factor, Pendent (TY325) Sprinklers are standard response, standard coverage, decorative 5 mm glass bulb type spray sprinklers designed for use in light, ordinary, or extra hazard, commercial occupancies such as banks, hotels, shopping malls, factories, refineries, and chemical plants.
View Product Datasheet TY3251
QR 21.75 – QR 29.00View Options -
XLPE Pipe Insulation
XLPE pipe insulation is specially designed for the HVAC segment and for applications in the Textile and Building industry, for thermal & acoustic insulation. Conforms to Class 1 for Surface Spread of Flame Characteristics and Class ‘O’ for Fire Propagation, are dust and fiber-free, and user friendly.
View Product Catalogue
QR 12.00 – QR 40.85View Options -
Square Diffusers ( KDF series)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
The performance objective of a ceiling air Diffuser is to deliver conditioned air into an occupied space in a quiet draft free manner. The performance efficiency of a particular diffuser design is usually judged by the diffuser’s ability to rapidly dissipate the air velocities and temperature differential of the supply air before it enters the occupied space. Many Models are developed by KMC to meet air distribution and architectural requirements.
View Product Datasheet
QR 38.00 – QR 126.00View Options -
Duct insulation Rolls-FSK Faced
KIMMCO Duct Insulation rolls are manufactured from stable glass fibers bonded with thermosetting resins. They are light in weight, strong, resilient, flexible, and easy to handle.
View Product Datasheet
QR 201.00View Options -
Acoustic Liner Insulation ...
KCL is used to line air conditioning ducts, walls, and/or ceilings of acoustically sensitive areas to provide efficient sound insulation for any variety of structure, and/or sensitive facilities as home theaters or studios, curtain walls
View Product Datasheet
-
Linear Slot Diffuser (Model:...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
Linear Slot Diffusers manufactured by KMC have been designed to satisfy architectural concepts that require continuous length applications without compromising air distribution performance. These diffusers utilizes an adjustable vane in each slot to control the direction of air discharge either parallel with or perpendicular to its face surface. The adjustment from the face of the diffuser allows for pattern control in a full 180 degree range for either right or left parallel, intermediate or perpendicular
View Product Datasheet
QR 46.00 – QR 253.05View Options -
Rubber Insulation for Pipe -AP
ARMAFLEX AP RUBBER INSULATION
Armaflex AP Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges, etc). Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning ductwork, and refrigerated pipework. This grade of Insulation has in build micro ban antimicrobial technology & has better fire properties and complies with ASTM E-84 standard.
Standard Length: 2 Mtr pc Qty ,Price is per Mtr.
View Product Datasheet
QR 16.80 – QR 42.50View Options -
U Bolts with Lining
U-Bolts with lining are used to secure piping to structural members.
QR 3.22View Options -
Rubber Support Inserts
Used at the supporting points of insulated pipes to prevent crushing of insulation. Available with steel reinforcements for larger sizes. Inherently superior to wood .
View Product Datasheet
QR 1.46 – QR 131.31View Options -
Circular Diffuser (Model: KCM)
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC Circular Diffusers have a circular cone with elegant styling to provide maximum air diffusion efficiency. They are intended for application in air conditioning and ventilation systems in civil as well as industrial zones. Suitable for cooling and ventilation systems for wide diffusion effect.
View Product Datasheet
QR 50.00 – QR 295.00View Options -
Double Deflection Grilles (M...
Finish: Powder coated to RAL 9010 as standard. Other finish is available as option.
KMC supply Grilles and Registers have adjustable louvers and are available in double deflection models. The Double deflection grilles are designed to have two sets of blades in both the horizontal or vertical orientation with air pattern being adjustable in both horizontal and vertical planes. Adjustment of the Horizontal blades provides the control over the deflection of the air pattern. Adjustment of the vertical blades provides the spread control of the air pattern, reducing both throw and drop.
View Product Datasheet
QR 18.00 – QR 611.00View Options