-
Band Hanger
Material: Steel, Pre-Galvanized to G90 specifications
Function: For fire sprinkler and other general piping purposes. Knurled swivel nut design permits hanger adjustment after installation.View Product Datasheet
QR 1.00 – QR 16.65View Options -
Extention Split Pipe Clamp
Material: Malleable Iron
Function: Designed for suspending non-insulated pipe horizontally or vertically.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized.View Product Datasheet
QR 3.85 – QR 26.50View Options -
Rubber Lined Split Clamp
Standard finish: Electro-zinc plated complies with ASTM B633
Function: Designed for suppressing vibration and soundView Product Datasheet
QR 1.27 – QR 5.44View Options -
U Bolt with 4 nuts
Heavy-duty U-Bolts designed to grip, guide or support plain and insulated pipes. Supplied complete with four nuts
View Product Datasheet
QR 9.60 – QR 256.00View Options -
Riser Clamp
A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping (risers) at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe.
View Product Datasheet
QR 14.30 – QR 131.00View Options -
Short Insulation Protection S...
Function: Designed for protection of foam, fiberglass, or any high density insulation when used with pipe hangers.
Finish: Pre-GalvanizedView Product Datasheet
QR 5.70 – QR 14.50View Options -
Pressure Sensor for Liquids
Active sensor (4…20 mA) for pressure measurement in HVAC systems. The sensor is suitable for water and water/glycol mixtures
View Product Datasheet
QR 686.00View Options -
O- Ring
O rings are used to block a path that may otherwise allow a liquid or a gas to escape. The o ring is placed into a groove to secure them in place, and then compressed between two surfaces
View Product Datasheet
QR 224.00View Options -
Submersible Pump
Wastewater and sewage pumps with an in-built macerator system. Enable pumping of fecal matter into small pressure pipes (DN40)
View Product Datasheet
QR 4,765.00View Options -
Centrifugal Roof Extractors
Centrifugal roof fans are designed for direct or ducted ventilation in residential, commercial, and industrial buildings. they are designed for easy installation, high-efficiency low noise levels. The motor is outside the airflow, this allows the fan to exhaust clean or slightly dusty air with temperature
View Product Datasheet
QR 3,930.00View Options -
Inlet Cone
It allows a higher fan efficiency in case of installation with an inlet or outlet not ducted. Manufactured in steel sheet, with one flange according to UNI ISO6580 – EUROVENT to be fitted to the CC fan, and an aerodynamically shaped bell mouth, with fixing holes for a protection guard Protected against atmospheric agents by epoxy paint.
View Product Datasheet
QR 1,365.00View Options -
Bronze Check Valves
FIVC Swing Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet Bronnze Disc CS0921 Rubber Disc CS1121
QR 42.00 – QR 136.00View Options -
Balancing Valves Fixed Orifice
FIVC Static Balancing Valve is designed with integrated pressure probes to determine the flow rate through the integrated fixed orifice. The valve offers an accuracy of ± 5 pct. on all settings, for precise flow regulation.
View Product Datasheet
Brass body FSB25GF01
QR 144.00View Options -
Dual Plate Check Valve
FIVC Dual Plate Wafer Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet
QR 510.00View Options -
High Flow Insert
The High Flow PICV Insert enables flow rates up to 0.5 l/s in the DN15 and DN20 valves and flow rates up to 0.736 l/s in the DN25 valve, which is beneficial for installations with space limitations. Check out the data sheet on our product page for all details.
View Product Datasheet
QR 380.00View Options -
Bronze Globe Valve Rising Stem
FLOWCON, ME – GLOBE VALVE, MODEL: FLBGL-16, Bronze globe valve, threaded ends.
View Product Datasheet
QR 55.00View Options -
Cast Iron Swing Check Valves
Swing Check Valve is designed as a single-direction device, which eliminates the return of pressurized fluid.
View Product Datasheet
QR 722.00View Options -
Bronze Gate Valve
Gate Valve is designed to be installed in pipelines only for isolating purposes. Benefits of using gate valves include the feature of good closing along with the minimum pressure loss.
View Product Datasheet
QR 410.00View Options -
Butterfly Valve – Semi-...
FIVC Lugged Butterfly Valve with its replaceable seat is designed to be installed in pipelines for isolating or regulating purposes. With its high-quality rotational disc, the valve features a quick shut-off function.
View Product Datasheet
QR 210.00 – QR 305.00View Options -
Cast Iron Y Strainers
Y-Strainer Valves are designed to collect and prevent solid impurities from entering the pipeline that can cause malfunction and damages to the most sensitive plant components such as pumps, control valves, flow, and heat meters.
View Product Datasheet
QR 984.00View Options -
BTU Meter
The thermal energy meter has been designed specifically for the many different applications in which heat metering can be used to meet the particular needs of the district and communal heating systems, building energy management technology, and cooling applications
View Product Datasheet JETBTU0016
QR 830.00View Options -
Double Check Valve Assemblies
Series LF007 Lead-Free* Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Their compact design makes them easy to install in tight spaces
View Product Datasheet
QR 410.00 – QR 1,705.00View Options -
Water Hammer Arrestor-Watts L...
The Watts Series LF15M2 and LF15M2S incorporates a precharged, permanent sealed air chamber to absorb the shock. The sealed chamber prevents the loss of air to the water and assures long and trouble-free life.
View Product Datasheet
QR 155.00View Options -
Double Regulating Valves
Variable Orifice Valve Double Regulating PN16
Variable orifice cast iron double regulating valve Diameter from DN050 – 2″ to DN300 – 12″. landed PN16 according to EN1092-2 (ex DIN2533) Lengths according to EN558-1 series 1 (ex DIN3202 F1). Alkyd/acrylic single layer water paint coating (50-100μm) Tolerance on nominal Kv for completely open valve ±5%. With plugged threaded drains (¼” ISO 7/1Rp) for test points. Provided with test points (given unmounted)
View Product Datasheet
QR 733.00 – QR 2,720.00View Options
- ALL PRODUCTS
- FIRE FIGHTING & FIRE ALARM
- HVAC & PLUMBING
- INSULATION MATERIALS
- AIR OUTLETS & DAMPERS
-
Grilles & Diffusers
- Egg Crate Grilles (Model: KECG)
- Door Grille (Model: XNSA)
- Spot Diffuser (Model: SPD)
- Jet Diffuser (Model: KDJ)
- Linear Slot Diffuser (Model:…
- Double Deflection Grilles (M…
- Exhaust Grilles (Model: KX3HD)
- Circular Diffuser (Model: KCM)
- Disc Valves (Model: KDV)
- Square Diffusers ( KDF series)
- Single Deflection Grilles (Mo…
-
- BROWSE BY BRANDS
-
- RATE US
- POPULAR
BRANDS
-
Refrigeration Copper Coils
Brand: IUSA Cambridge Lee
Copper Pipes & Coils manufactured to ASTM B743 standards are suitable for gas applications and other high-pressure refrigerants.
Buy nowIsoline Pipe InsulationBrand: K-Flex Isoline
Isoline is a high-quality rubber insulation which is a closed-cell tube insulation product used to prevent condensation on piping applications.
Buy nowWall Split Air ConditionerBrand: Ruud
Developed with environment friendly R410A refrigerant. R410A refrigerant is highly efficient and has an Ozone Depletion Potential (ODP) of 0.
Buy now
-